Australia outdoor fence temporary fence

Dimensions: 1.8×2.1m, 1.8×2.4m, 2.1×2.4m,

Frame: φ32, φ38, φ42

Mesh: 50×100mm, 50×150mm, 60×150mm, etc.

Wire diameter: 3.5mm, 4.0mm

Base: plastic or metal

Other sizes are also possible

Specifications

Column specification

Panel size 1800 (height) x 2100 (length), 1800 (height) x 2400 (length), 2100 (height) x 2400 (length)

Opening (mm) 50x100 / 50x150 / 50x200 / 60 * 150 / 75x150

Wire diameter (mm) 3 / 3.5 / 4 mm

Panel frame (mm) Φ32,38,42,48 thickness: 1.2, 1.5, 1.6, 1.8, 2.0

The fence stays 1500mm, 1800mm high

Fence feet Plastic feet 600*220*150 or steel feet

Fence clip spacing 100 or 75

Finishing of the fence Hot dip galvanizing, then painting, galvanizing, then powdering

Note: If you are not satisfied with the above specifications, you can customize the fence according to your requirements.

Product Description

This kind of round tube frame temporary fence is very popular in Australia. It can be installed quickly and easily without disturbing the ground by digging holes or laying foundations. Our experts can help you define the protective netting, optimal placement and options needed to achieve your goals.

This kind of temporary fence made of HT-FENCE can fully meet the requirements of the Australian market.

When used in construction with our plastic/concrete fence feet, steel clamps and struts, it creates a complete temporary fence system that is very stable, versatile and cost-effective.

Basis:

The company has large injection yard equipment and can produce plastic bases by itself. The plastic base is filled with concrete and can work directly. It can also be made into heavy-duty, corrosion-resistant steel. The temporary fence panel can be inserted into the base to stand.

Installation method:

The temporary fence is built from the site and can be assembled on site. Very convenient for transportation. If required, special panels and columns can be provided.

Temporary fence function

It can be installed quickly and easily without disturbing the ground by punching or laying foundations.

• Anti-crawl filler

• 360° welding between vertical and horizontal pipes

• The horizontal pipe ends are crimped to increase strength.

• The thickness of galvanizing exceeds the industry benchmark.

During the manufacturing process, manual welding is used to obtain the best strength, with an average hot-dip galvanized surface exceeding 70 microns. We use the highest quality material specifications and incorporate them.