ITEM

Factory direct stainless steel cable wire rope galvanized inner wire

MATERIAL

1.Galvanized steel wire rope.

ated PVC/PE /Teflon/Rubber/SLPE) High carbon steel with bigger braking load

3.Armed inner wire

4.gear inner wire

Structure

1)joint :7x7,7x19

2)Rolling :1x19,1x12

3)Shift inner wire (1+14), injection molding inner wire , speedometer and so on

Diameter

1.2mm, 1.4mm, 1.5mm, 1.6mm, 1.7mm, 1.8mm, 1.9mm, 2.0mm, 2.5mm, 3.0mm, 4.0mm 

Colour

Injection molding inner wire and hose can be divided into many colors. Mainly in gray.

Application

Motorcycle cable .auto cable, and other tractor, truck cables.We can also sell it into pieces with head and plastic outer.

Character

1. 1*19 structure is hard than 7*7, used for goes smooth,Use the frequency is not high cable.After PVC coating, Increased life expectancy. Increased efficiency, increased sliding resistance. Use for Brake cable, Throttle cable,Bonnet cable.

2.7*7 Structure is soft than 1*19,and Life expectancy is higher than 1 * 19.For bending more,After PVC coating, Increased life expectancy. Increased efficiency, increased sliding resistance. the use of high frequency cable,Accelerater cable,clutch cable.

Standard

We can also sell it into pieces with head and plastic outer.

Packaging

Usually packing in1,000m/coil, 2,000m, 500m/roll, We also followed a definite package as per customer's requirement

Braking load (KGF)

1)1*12 1.2mm :155

2) 1*19 2.0mm:425

3)1*19 2.5mm:660

Tensile strength 

1870Mpa