SMG2000E digital double-clamp phase voltammeter is also called double-clamp phase voltammeter and digital double-clamp phase meter. The digital double-clamp phase voltammeter is a high-precision and portable method for measuring voltage, current and phase.

Hand-held digital phase voltammeter, digital double clamp phase voltammeter standard support: JJG440-2008. The digital double clamp phase voltammeter detects the wiring group of the transformer, and the phase voltammeter distinguishes the inductive current

Circuit, capacitive circuit and three-phase voltage phase sequence, phase voltammeter can also test the secondary circuit and bus differential protection system, and also used to check whether the wiring of the watt-hour meter is correct or not.

        The SMG200E digital double clamp phase voltammeter is developed with reference to the JJG440-2008 measurement industry standard. The SMG2000E handheld digital double clamp phase voltammeter measures voltage, current and phase.

A high-precision, dual-channel, portable handheld digital phase voltammeter, which can easily measure the phase between U-U, I-I and U-I. The digital double clamp phase voltammeter detects the wiring group of the transformer.

The phase voltammeter distinguishes the inductive circuit, the capacitive circuit and the phase sequence of the three-phase voltage. The phase voltammeter can also test the secondary circuit and bus differential protection system, and is also used to check whether the wiring of the watt-hour meter is correct or not.

        The SMG2000E digital double-clamp phase voltammeter adopts a clamp-on current transformer conversion method to input the measured current. There is no need to disconnect the measured line during measurement. When measuring the phase between the two voltages U1-U2,

The two input circuits are completely insulated and isolated, so it completely avoids the possible short circuit of the line under test caused by miswiring and burns the measuring instrument. The display adopts a high-contrast liquid crystal display, and the elevation angle is super

Over 70°, SMG2000E digital double clamp phase volt-ampere transformer is widely used in power maintenance departments and power production enterprises.

   1. The digital double clamp phase voltammeter has an exquisite structure and is easy to use;

       a, handheld phase voltammeter structure

       b. There is no need to disconnect the circuit and change the limit when measuring the phase in the current range of 10mA～10A and the voltage range of 3V～500V

       c. The display adopts a high-contrast liquid crystal display, with characters up to 25mm, and the screen angle can be freely switched about 70°

       d. The switch function and layout are reasonable, and the measured voltage, current and phase can be read by turning the switch

       2. Insulation resistance function: This digital double clamp phase voltammeter uses a patented current clamp, with a current resolution of 0.1mA and a voltage resolution of 0.1V;

       3. Low power consumption: micro-power design, phase voltammeter with battery voltage detection function.