equipment, buy 32×32 MEMS Optical Switch Matrix，Can be customized according to demand on China Suppliers Mobile

Product Details

Product features

Low insertion loss

Fast switching speed

LCD display screen, intuitive display light path status

Panel key and network interface command mode for light path switching setting, and can be operated by the chain interface command lock key

Output port (OUT port) with light power monitoring

Scope of application

Multichannel optical monitoring in optical transmission systems

Automatic LAN multi-light source/detector switching

Optical sensing multi-point dynamic monitoring system

Optical testing system for optical fiber, optical devices, network and field engineering optical cable testing

Optical device assembly and adjustment

Technical parameters

Type no.	MFSW-32X32-2U-LP
Working wavelength	1260 ～ 1650nm
Test the wavelength	1310/1550 nm
Insertion loss	≤4.5 dB
Monitor optical power range	+20 ～ -50 dBm
Monitor optical power accuracy	±0.5 dB （+20 ～ -30 dBm） ±1.0 dB （-30 ～ -50 dBm）
Monitor optical power resolution	±0.01 dB
repetitive	≤±0.2 dB
Return loss	≥45 dB
crosstalk	≥50 dB
Wavelength dependent loss	≤0.8 dB
Polarization dependent loss	≤0.3 dB
Switch time	≤ 50 ms
Optical fiber type	SM（9/125um）
Connector type	LC/PC
Monitor the port	RJ45、RS-232
Working power supply	AC: 85 ～ 264 V（50/60Hz）OR DC: 36 ～ 72 V
Working temperature	-10 ～ + 55℃
Storage temperature	-40 ～ + 80°C
The case type	19-inch standard 2U rack（483×500×89mm）

Illustration of optical path of equipment

Equipment maintenance

Reasonable use and proper storage of equipment can maintain good performance index for a long time and extend its service life, so proper maintenance is required:

（1）、The equipment should avoid strong mechanical vibration, collision, falling and other mechanical damage.Transport must have good packaging and vibration, rain and waterproof measures;

（2）、The equipment should be kept clean and the working environment should be free of corrosive gases such as acid and alkali.Use a clean towel with water or soapy water to gently scrub the chassis and panels.Do not use alcohol and other solvents to scrub.

（3）、Remove the fiber cable should be timely covered with dust caps to prevent hard objects, dust or other dirt touching the end face of the fiber.

Please feel free to contact us for any unspecified matters.We would be glad to hear your valuable comments.

Equipment maintenance common fault handling

The fault performance	Possible reasons for	The solution
No display after boot	The electricity is not properly connected	Reconnect the power and turn it on
Excessive insertion loss	The end face of the connection head is soiled	Rinse the end face of the smooth connection head and fix the connection head.Check the end face for damage.
The panel cannot switch light paths	The panel keys are locked	Allow panel keys to be used by sending commands through the serial port.
The upper computer instruction is invalid	The serial port is not set correctly	The query checks the serial port Settings
The upper computer instruction is invalid	The serial line is not properly connected	Power off first, recheck the serial line, and then power on.

For more product information, please visit our website:/index.php?aid=97