Optical fiber laser integrated structure, no optical pollution, no power of the coupling loss, compact structure compact, air cooling

Laser long service life

Optical fiber laser marking machine use 1064 nm laser diode as the sources are used to pump, the average working hours can up to 100000 hours.

Small and exquisite Volume , applicable in the bad environment

Optical fiber surface area/volume ratio is high, also good cooling effect, no need huge water cooling system, just simple air cooling, can be running in bad conditions, such as high impact, high vibration, high temperature, dirt under the conditions of the normal operation.

Free maintenance operation

Optical fiber laser no need for any maintenance (not including adjust or clean lens)

Light path and galvo scanner

The optical system: 1064 nm based on the high precision, vibrating mirror reflection focusing system.

Laser correction: choose red visible laser collimator's systems instructions axis position, indicating light and laser coaxial, in the process to tracing the function of the instructions and timely and accurate registration.

Galvo mirror is set to track operation of the laser executive mechanism, and it mainly consists of high accuracy servo motor, motor driven plate, mirror, F-θ lens and dc supply of power.

Special marking software of Metal Laser Engraving Machine

Marking software in WINDOWS interface,English operating system, compatible with PHOTOSHOP, CORELDRAW, AUTOCAD and so on many kinds of drawing software:time date, bar code, serial number, mark, output in English, graphics, all kinds of bar code, Qr code, etc. Word stock the function is all ready.

1.1 The European CE standard production

1.2 Laser type: fiber laser source. We used the best brand in China- Raycus laser source, the power 20w/30/50w for optional

1.3 Scsnhead brand galvo head.

1.4 F-theta lens: 110*110mm, 200*200mm (or 300*300mm)

1.5 Control system: Beijing JCZ control system, and EZCAD software

1.6 Supported Photoshop, Coral draw and format AI, PLT, DXF, BMP, DST, DWG, DXP etc.

1.7 Computer: HP laptop (industrial computer for desktop type)

1.8 Free parts: protective glasses, pedal, limited bar

• Surface Etching:  A surface etch usually gives a bright contrasting mark. 
• It is ideal for marking on coatings without penetrating through, such as Chrome, Nickel, etc.

• Surface Annealing: Most common when marking on stainless steel.

• Ablation: The ability to remove surface treatments (i.e. Coatings of paint) to create high 

  contrast without damaging the base material – widely used in backlit material processing, such as backlit buttons.

• Paint Removal: The process of burning or vaporizing the a coating of paint that is either on 

  metal or plastic. Most common for backlit buttons.

• Engraving: The process of vaporizing a material to dig into the part.