Tandem Thrust Bearing, buy M4CT2264 Tandem Bearings in Twin Screw Extruder Gearboxes on China Suppliers Mobile

Product Details

Tandem Thrust bearings are comprised of "stages" which include precision ground and matched thrust plates. These bearings also include compression sleeves separated by cylindrical roller assemblies. This design enables the Tandem Thrust bearings to provide a solution in a radial restricted envelope. The bearings are available in multiple stages, 2-8 to accommodate your design requirements. Depending on your preference, these bearings are available in a wide variety of sizes and options.

TandemThrust Bearings can receive heavy load in a limited space and support firmly in the direction of axis and last long with low frictional power. In addition, these bearings are moved by oil lubrication. Also thesetandem thrust bearings are used principally in gear boxes for single & twin screw extruders in the rubber and plastic industries.

Model No.		Dimension(mm)				rows	Load rating（KN）		weight(Kg)
new	old	d	D	H	H2		Ca	Coa
M7CT1880	T7AR1880		80	200	200	7		2217	6.83
	T7AR18100	18			266	7	1028	4012	11.43
M8CT18100		18			304	8	1175	4586	13.03
M3CT1949E	T3AR1949E		49	67	66.5	3	129	340	0.5
M4CT1949E	T4AR1949E	19			88.5	4	230	535	0.74
M4CT2047			47	78	79	4	123	362	0.67
M5CT2047	T5AR2047	20			99	5	154
	T4AR2060	20	60		101	4	175
M5CT2262		22	62		110	5	270	896	1.78
M6CT2262	T6AR2262			132	132	6	310	1160	2.1
M4CT2264	T4AR2264		64	101	102.5	4	175	610	1.7
M4CT2264E	T4AR2264E	22		101	102.5	4	175	610	1.527
M5CT2264	T5AR2264	22	64	127		5	208	763	2.065
M5CT2264E	T5AR2264E	22		127		5	208	763	1.94
M6CT2264E	T6AR2264E	22	64	153	154	6	240	918	2.234
M6CT2264			64	153	154.5	6	240	918	2.5
		23	62	105	104.5	4	176	652	1.63
M3CT2385	T3AR2385	23	85	97	96.5	3	278	1236	3.118
M4CT2385	T4AR2385		85		129	4	371	1648	4.152
M5CT2385	T5AR2385	23		162		5	464	2060	5.143
M6CT2390	T6AR2390	23		209.75	209.75	6	732
M3CT2468				70	70	3	140.3	617.8	1.4

Extruders are used in the processi
ng of plastics in powder or granulate form, mixed with stabilisers, parting agents and any colourings and fillers; they are conveyed, compacted, degassed, homogenised and finally pressed through a die into profiled tooling. In order to apply the necessary forces correctly, very high demands are placed on the extruder gearboxesExtruders are used in the processing of plastics in powder or granulate form, mixed with stabilisers, parting agents and any colourings and fillers; they are conveyed, compacted, degassed, homogenised and finally pressed through a die into profiled tooling. In order to apply the necessary forces correctly, very high demands are placed on the extruder gearboxes