Diesel fuel oil tank car cleaning machine instructions
Maintenance
1. Single-phase motor with three-pin plug, inverted switch does not cut off the power supply, when maintenance , need to disconnect the plug, since the motor is equipped with starting capacitor and run capacitor, please note that the capacitor discharge;
2. The three-phase motor with four-pin plug, clockwise and reverse test after power needs to develop, witch to any position, diesel withdrawn from the draw tube is clockwise direction;
3. If you meet difficulty in starting the motor, running at normal operation or inability to stop, etc., mostly because of the wire is too fine too long between the washing machine to the power outlet and other causes low voltage, so you need to replace large diameter wire.
Filter Replacement:
When replacing the filter, need to empty the diesel in the washing machine, as follows:
1) The drawing-oil pipe and nozzle head pull out the oil, keep it not touch the diesel;
2) Open clockwise until the injector nozzle is no longer injection;
3) Open the reverse until the drawing-oil pipe is no longer injection;
4) Open the coarse filter drain valve, put the inverted switch to an inverted position, discharge all impurities diesel, close the valve;
5) Open the fine filter drain valve, switch to clockwise position, discharge all impurities diesel, close the valve;
6) Open the fine tank to replace the filter canister.
1. Size:
Package Size: Length 0.7M Width 0.75M High 1.05M
Dimension: Length 0.6M Wide 0.65M High 1M
2. Weight:
With packaging Weight: 70Kg
Net weight: 56Kg
3. Storage:
If the washing machine store in high temperature environment for long time, please refer to the instructions before starting the motor, check the motor insulation.
1. Easily damaged parts
Fine filter, coarse filter, pumping reinforced plastic pipes, pumping tubing interior skeleton, fuel injection pipe, injection-shaft junction bellows, rotating nozzle, Ο-ring, tank oil seal, visible window.
2. The warranty parts
Other parts except easily damaged parts are warranty parts (force majeure and man-made damage not covered under warranty).
3. Warranty Period
Five months warranty from date of purchase.
Q1: What is your Trade Terms?
A: FOB CFR CIF EXW DDP and DDU
Q2: What is your payment terms?
A: T/T,Western Union ,PayPay,Escrow and L/C
Q3: What is your delivery time?
A: Test bench is 7-10 working days,tester, diagnostic tool and injectors,we have stock.
Q4: Why should I choose your product?
A: We can provide you the best quality and the most competitive price ,and we have our own engineer,if you have any requirements you can contact us directly~
Taian North Test Equipment Factory is appointed by the country as the professional manufacturer of oil injection pump test bench. It gets the technique support from Tianjin university, Tianjin University of technology, Shandong University of science and technology, With more than 10 years export experience, and get high reputation from our customers.