Product Details

The Jolt Squeeze Moulding Machine Work principle

The worktable fall and collide with floating shock-iron,and the sand was tighted slightly, and then to compaction,get the top and bottom of sand mould are tight. The slightly shock is high frequency (500-1000 times/min), small amplitude (5-25 mm) vibration instead of low frequency (60-120 times/min), the large amplitude vibration. This kind of moulding machine made of sand mold are good quality, the basic requirement is also lower.

The Jolt Squeeze Moulding Machine Work Technical Parameters

Name	UNIT	Z143	Z144	Z145	Z146	Z148	Z149
The Max. dimension of Sand Box	mm	480400100	400500180	450500200	500600200	630800320	1100700320
Worktable/ Workbench dimension	mm	560*420	465*500	600*460	550*700	900*730	1200*830
Jarring Load / Air pressure	kgf /Mpa	0.55	0.6	300/0.6	300/0.6	0.6	0.6
Compressive stress	kgf	4000	4200	6300	7000	12000	18000
Compress process	mm	100	120	160	200	180	200
Drawing mould process	mm	160	150	200	200	320	320
Distance compacting plate with worktable	mm	200-370	300-400	300-450	350-450	680	600-700
Productivity	mould/h	40-60	40-60	40-60	40-60	40-60	40-60