White Fused Aluminum Oxide Grain F24-F220
USD $900 - $1100 /Ton
Min.Order:1 Ton
Zhengzhou Haixu Abrasives Co., Ltd.
White Fused Aluminum Oxide Grain F24-F220
white aluminum oxide grit is a white abrasive made from industrial alumina powder (Al2O3) with a content of over 98% and a small amount of iron oxide and silicon oxide. It is a white abrasive which is melted at high temperature. Its hardness is slightly higher than that of brown corundum and its toughness is slightly lower. It is made by smelting and cooling above 2000 degrees in arc, grinding and shaping, removing iron by magnetic separation, and sieving into many kinds of granularity. It is compact in texture, high in hardness, and sharp in shape.
High hardness and dense particles. Single-particle roundness is good.
The color is pure white, no impurities, to ensure the wear-resistant layer or wear-resistant paper color and transparency.
Uniform distribution of particle size, single-particle shape consistent, with a small amount of wear-resistant effect.
Chemical stability and acid, alkali no action, high-temperature stability is very good.
Low sodium white fused alumina abrasive grain from HAIXU Abrasive is produced strictly according to FEPA and JIS standard, all products are tested and qualified before shipment.
Typical Chemical composition(F60) | ||
AL2O3 | 99.40% | |
SiO2 | 0.15% | |
NA2O | 0.28% | |
Fe2O3 | 0.06% | |
CaO | 0.03% | |
Typical physical properties | ||
Color: | White | |
Hardness: | Mohs:9.0 | |
Maximum service temperature: | 1900 ℃ | |
Melting Point: | 2250 ℃ | |
Specific Gravity: | 3.95g/cm3 | |
Volume density | 3.6g/cm3 | |
Bulk density(LPD): | 1.55-1.95 g/cm3 | |
Particle shape: | Angular | |
Grains | 8# 10# 12# 14# 16# 20# 24# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# |
Bonded abrasives and coated abrasives.
Sandblasting media.
Surface treatment, finishing.
Lapping, polishing, decorative non-skid tile, and pressure blasting.
Ceramic tiles special ceramics.
Fluidized bed furnaces and skin/dental care.
Oilstone/polishing pad, grinding wheels etc.
üWe are a manufacturer, which can control the cost easier than trade company also can give you answer more quickly.
üAs a manufacturer, we know much in technique and can give you more support in technique problem
üProfessional and experienced service team, specialized in abrasive production ,more than 10 years.
üOur products are complete in specifications with various of sizes
üWe enjoy a good reputation in the customers in domestic and overseas markets.
üLarge production capacity, short lead time of products.
ü24*7 online service.