Bundor Ductile Iron Manual Butterfly Valve DN250
Negotiable
Min.Order:1
Henan Bundor Flow Control Co., Ltd.
Bundor butterfly valve seal ring dn 50 butterfly valve with spindle butterfly valve
Bundor butterfly valve seat ptfe water type butterfly valve with hand lever butterfly valve
Bundor electric butterfly valve flange butterfly valve electric flange universal butterfly valve
Bundor electric butterfly valve wafer butterfly valve universal butterfly valve
Bundor DN450 air actuated 2~44" pneumatic operated flange butterfly valve
Product Advantages:
1. This valve is a patented product of the company. The side flange of the product conforms to various pressures of various domestic and international standards.such as national standard, GB,GOST,ANSI,BS,JIS, etc. The connection is convenient and adaptable widely, which can reduce the types of purchase and stocking.
2. The wall thickness of the valve body meets the requirements of GB 26640, the thickness is thick, and the bearing strength is guaranteed.
3. The valve body is made of ductile iron material, spheroidization rate is 3 grades, the mechanical properties are stronger, the tensile strength is 450Mpa, and the elongation rate is more than 10%. Compared with gray iron body, the same thickness tensile strength is gray iron body. 2 times, the applicable working pressure is higher.
4. The valve seat uses imported rubber raw materials, containing 50% of rubber, Shore A hardness of 73 ± 3, tensile strength ≥ 15.2MPa; elongation at break ≥ 350%, valve sealing is reliable, opening and closing torque is stable, seat durable and long life, the number of opening and closing can reach more than 10,000 times.
5. The valve seat is a wide-side , the sealing surface is wider, the valve end seal is easier to guarantee, and the sealing is more reliable. The wide-side valve seat facilitates the installation of the valve, and has a wide contact surface with the flange boss on the pipe, and the sealing performance is reliable. Installation accuracy requirements are lower than for narrow side seats. The valve seat has a concave groove in the axial direction and is equipped with an O-ring, which can realize the secondary sealing of the valve seat in the axial direction.
Name | 1-Body | 2-Seat | 3-Disc | 4-Stem | 5-Handle | |||
Material | DI | EPDM | DI | SS304 | DI | |||
NPS | DN | L | D1 | D2 | L1 | L2 | L3 | B |
2″ | DN50 | 48 | 86 | 92.3 | 75 | 129 | 24 | 9 |
2.5″ | DN65 | 52 | 101 | 107 | 82 | 136 | 24 | 9 |
3″ | DN80 | 53 | 116 | 122 | 99 | 153 | 24 | 9 |
4″ | DN100 | 58 | 148 | 153 | 110 | 167 | 24 | 11 |
5″ | DN125 | 62 | 174 | 179 | 125 | 193 | 24 | 14 |
6″ | DN150 | 62 | 204 | 208.4 | 145 | 209 | 24 | 14 |
8″ | DN200 | 65 | 252 | 262.3 | 170 | 251 | 30 | 17 |
Inquiry now
View product categories
Visit our homepage
View product categories
Get the best quotation
About us
Inquiry now
Q:When the products will be shipped ?
A:Within 7-15 days after receiving the prepayment.
Q:Do you have OEM service ?
A:Yes . A variety of products size , quality and quantity can be cutomized according to your needs.
Q:Could you offer a free sample ?
A:Yes , samples can be proveded for free.
Q:How can I pay for the products ?
A: We accept a variety of payment methods. Such as T/T , L/C,D/P ,Western Union , Paypal ,Trade Assurance.
Q: How do you deal with that if there are some quality problems in products?
A: We will be responsible for all the quality problems.
Q:Are you a facrory or trade company ?
A: We are a factory with 26 years experience in valve research and production .