Ø Touch interface is more convenient to operate.

Ø Innovated device of tank collects fragments of glass and water.

Ø Experiments of pressurization and maintaining pressure can be carried out respectively.

Ø The accuracy of reading pressure can reach 0.01Mpa and the maximum testable pressure is up to 6.00mpa to meet user’s requirements for high-level test.

Ø The test speed is so fast that the boosting time for each bottle tested is less than 10 seconds, which helps users to improve the efficiency.

Ø Automatic functions: pressurization, maintaining pressure, pressure relief at the end of the test and fault alarm.

Ø Micro-printer facilitates filing and saving data.

The pressure generated by the hydraulic pump driven by the servo motor is transmitted through the pipeline to the pressure sensor and the glass bottle tested in an equivalent manner . The equipment’s controller collects the signal of pressure from the sensor in real-time and controls the servo motor according to the signal value. Drive the hydraulic pump to linearly increase the pressure in the system according to the requirements until it reaches the preset value. The deadline of ramp pressure will be known and users can check if the bottle would rupture at a preset pressure value.

GB/T 4546-2008, YBB00172003-2015.

Internal pressure test of various glass bottles such as beer bottles, beverage bottles, vials, infusion bottles, etc. Pressure holding test and burst pressure test of various different volume glass bottle.

Instrument, Micro-Pinter, Clamps.