PWR-C1-1100WAC Cisco Power Supply for Cisco 3850 Series Switches 1100W AC Config 1
Negotiable /Unit
Min.Order:1 Unit
PWR-C1-350WAC Cisco 3850 Series Power Supply PWR-C1-350WAC 350W AC Config 1 Power Supply
PWR-C6-600WAC Catalyst 9000 Switch Power Supply Config 6 hot-plug 600 Watt
PWR-C2-1025WAC Catalyst 3650 Series Spare Power Supply 1025W AC Config 2
PWR-C2-250WAC Catalyst 3650 Series Spare Power Supply 250W AC Config 2 Power Supply Spare
PWR-4450-AC ISR Router Power Supply 450W AC Power Supply for Cisco ISR 4450
PWR-C2-640WAC Catalyst 3650 Series Spare Power Supply 640W AC Config 2 Power Supply Spare
Cisco 3850 Series Power Supply - PWR-C1-1100WAC 1100W AC Config 1 Power Supply for 3850 Series.
PWR-C1-1100WAC Specification
PWR-C1-1100WAC Specification | |
Power supply rated maximum | 1100W |
Total output BTU (Note: 1000 BTU/hr = 293W) | 3793 BTU/hr, 1100W |
Input-voltage range and frequency | 115-240VAC, 50-60 Hz |
Input current | 12-6A |
Output ratings | -56V at 19.64A |
Output holdup time | 10 ms minimum at 102.5VAC |
Power-supply input receptacles | IEC 320-C16 (IEC60320-C16) |
Power cord rating | 13A |
Physical specifications | (H x W x D): 1.58 X 3.25 X 13.7 in Weight: 3 lb |
Operating temperature | 23 to 113°F (-5 to 45°C) |
Storage temperature | -40 to 158°F (-40 to 70°C) |
Relative humidity operating and nonoperating noncondensing | 5 to 90% noncondensing |
Altitude | 10,000 ft. (3000 meters), up to 45°C |
MTBF | Calculated MTBF must be greater than 300,000 using Telcordia SR-332, Method 1, Case 3. Demonstrated MTBF is 500,000 hr (with 90% confidence level). |
EMI and EMC compliance | FCC Part 15 (CFR 47) Class A ICES-003 Class A EN 55022 Class A CISPR 22 Class A AS/NZS 3548 Class A BSMI Class A (AC input models only) VCCI Class A EN 55024, EN300386, EN 50082-1, EN 61000-3-2, EN 61000-3-3 EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN 61000-6-1 |
Safety compliance | UL 60950-1, CAN/CSA-C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, CCC, CE Marking |
LED indicators | “AC OK”: Input power to the power supply is OK “PS OK”: Output power from the power supply is OK |