MS-70 Rapid moisture tester, its operation is simple, easy to observe and to its better performance is fully used in food, tobacco, pharmaceutical, oil, paper making, feed, chemical industry, coating, mining, environmental protection, geology and other industries for rapid determination of moisture content of material, at the same time meet the solid, particles, powder, gel body and liquid moisture content measurement requirements.

Features:

● Fast uniform halogen lamp heaters with innovative SRA technology

Straight tube halogen lamps and uniquely designed SRA are used to shorten measurement time and form a fast and uniform heater.

Low and high precision

With the rapid and sensitive weighing sensor of SHS, the moisture content of very few samples can be measured with high precision under weighing.

● Adopt sodium tartrate dihydrate as the standard of measuring water content accuracy inspection

Sodium tartrate dihydrate is a stable water content of 15.66%+0.3/-0.1 of the chemical substances, so the most reliable for high-precision inspection, supply tester as reference value.

● Heater temperature calibration (MS/MX only)

Optional temperature calibrator, calibration results can be output in GLP, GMP, ISO format.

● The standard revent-moisture software (MS/MX only) realized real-time graphic display

The software Winct-Moisture is a Moisture content analysis software specially designed for graphic display. When measuring the Moisture content, it can display the graph of Moisture content change and set the measuring program of different samples through computer-aided analysis according to this graph.

● Measurement procedure, measurement results storage function

Up to 20 groups of measurement programs can be stored, and different measurement programs can be called for moisture content measurement at any time according to different samples, so fast measurement can be realized and operating errors can be avoided (MF can be stored up to 10 groups,ML can be stored up to 5 groups). The measurement results can be stored up to 100 groups (MF 50 groups,ML 30 groups) and output through a computer or printer. Completely avoid human error.

● In line with GLP/GMP/GCP and ISO standards, with date/time, ID, calibration data and test record output can be calibrated and measured data record output, to meet the requirements of quality management and certification.

● Standard RS-232 interface, two-way communication with PC or connected to the printer.

● Large screen fluorescent display with clear and easy observation

Measurement procedure, set value, water content change rate, measurement status, data number and other important information are clearly displayed at a glance.

● Components are easy to operate

Ergonomically designed disc handle to avoid burns when hot samples are placed or removed. Winged handle makes it easy to open and close the heat cover.

● Low maintenance cost guarantee

Users do not need to stop using when replacing the halogen lamp, and the protected chamber is easy to clean (the life of the halogen lamp is about 5000 hours)

● Five kinds of measurement procedures

Standard mode: automatically complete measurement by setting high, medium and low measurement accuracy.

Automatic mode: automatically end the measurement when the water cut change rate is less than a set ratio.

Fast mode: in order to realize rapid measurement, the first 3 minutes after starting is heated at 200℃, and then the measurement is completed according to the automatic setting.

Timing mode: by setting the duration to complete the measurement.

Manual mode: the measurement process is operated by pressing the start and stop keys.

● Four kinds of drying procedures

Standard drying: heat up to set temperature directly after starting.

Asymptotic drying: gradually heating up to the set temperature at a preset time.

Step-by-step drying: different temperatures are used in different stages according to time.

Fast drying: after rapid heating at 200℃ for 3 minutes, continue to heat according to the set drying temperature.

Through any combination of measuring procedure and drying procedure can fully meet the determination requirements of different samples.

Standard accessories

● Sample tray (20 PCS MS/MX/MF, 10 PCS ML)

● Disk handle (MS/MX/MF has 2, ML has 1)

● Tweezers, sample spoon and test sample (30g sodium tartrate dihydrate) (MS/MX/MF only)

●CD-ROM (MS/MX for winct-moisture, MF for winct-moisture)

●MS/MX with RS-232 wire,

Low showed membrane

● Dustproof film (MS/MX/MF only)

● User Manual

● Quick access to the card

When the power cord

● Two fuses

model    Weighing scale  Accuracy of reading      The water content

                                                                             Measurement accuracy            Temperature preset range

MS-70     71g                  0.0001g                           0.001/0.01/0.1%                         30-200 degrees

MX-50     51g                  0.001g                             0.01/0.1%                                   50-200 degrees

MF-50     51g                   0.002g                             0.05/0.1/1%                               50-200 degrees

Heating source: 400W halogen lamp

Moisture content display

Relative moisture content, absolute moisture content, dry to wet ratio, wet to dry ratio

Determination method

Standard, Automatic, Timing, Manual

Weighing plate size (mm)

Diameter of 85

Dimensions W×D×H(mm)       215x 320x173

Weight (about Kg) 6.0