ASR1004 Overview
This product is Cisco ASR 1004 Chassis, Dual P/S. Before the router operates, necessary components must be installed. About its configuration
Cisco ASR 1004 Router system consists of the following system level components:
· Two Cisco ASR 1000 Series SPA Interface Processor
· One Cisco ASR 1000 Series Embedded Services Processor
· One Cisco ASR 1000 Series Route Processor
· Dual (redundant) AC and DC power supplies
This ASR1004 is similar with the ASR1004=. The ASR1004= is a spare one.
- ASR1004 Specification
ASR1004 Specifications Physical specifications
Note: Depth applies to chassis edge-to-edge dimension and does not include protrusions such as card handles, power-supply handles, and cable management brackets.
Refer to the applicable hardware installation guide for additional details.
Height: 7 in. (177.8 mm)
Width: 17.2 in. (437.4 mm)
Depth: 18.15 in. (461.0 mm)
Weight:
● 68.7 lb (31.16 kg) (with dual AC power supply, SPA blank covers, Cisco ASR 1000 Series 10-Gbps ESP [ASR1000-ESP10] or ASR 1000 Series 40-Gbps ESP [ASR1000-ESP-40], Cisco ASR 1000 Series Route Processor 1 [RP1] [ASR1000-RP1], two Cisco ASR 1000 Series 10-Gbps SIPs [ASR1000-SIP10] or ASR1000 Series 40-Gbps SIPs [ASR1000-SIP-40], and no SPAs)
Default memory
4-GB DRAM RP1
8-GB DRAM RP2
Number of SIPs or Ethernet line cards supported
2
Shared port adapters
8 SPA slots
Ethernet port adapters
N/A
Cisco ASR 1000 Series ESP
1 ESP slot
Route processor
1 route-processor slot
Redundancy
Software: Yes
Built-in Gigabit Ethernet ports
0
Built-in 10 Gigabit Ethernet port
No
Network interface module
No
Cisco ASR 1000 Series
Cisco ASR 1004
ESP support
Cisco ASR 1000 Series 10-Gbps ESP (ASR1000-ESP10), noncrypto Cisco ASR 1000 Series 10-Gbps ESP (ASR1000-ESP10-N), Cisco ASR 1000 Series 20-Gbps ESP (ASR1000-ESP20), and Cisco ASR 1000 Series 40-Gbps ESP (ASR1000-ESP40)
ESP bandwidth
10 to 40 Gbps
ESP memory
Cisco ASR 1000 Series 10-Gbps ESP (ASR1000-ESP10) and ASR 1000 Series 10-Gbps ESP (ASR1000-ESP10): 2‑GB DRAM default; 2‑GB DRAM maximum
Cisco ASR 1000 Series 20-Gbps ESP (ASR1000-ESP20): 4‑GB DRAM default; 4‑GB DRAM maximum
SIPs and Ethernet line cards
Supports Cisco ASR 1000 Series 10-Gbps SIP Carrier Card (ASR1000-SIP10), Cisco ASR 1000 Series 40-Gbps SIP Carrier Card (ASR1000-SIP40), and ASR 1000 Fixed Ethernet Line Cards; two 10 GE + twenty 1 GE line cards (ASR1000-2T+20X1GE); and six 10 GE line cards (ASR1000-6TGE)
Embedded hardware-based encryption
Yes: On Cisco ASR 1000 Series 10-Gbps ESP (ASR1000-ESP10) with up to 4 Gbps and on Cisco ASR 1000 Series 20-Gbps ESP (ASR1000-ESP20) with up to 8-Gbps crypto support throughput
Note: No support on noncrypto Cisco ASR 1000 Series 10-Gbps ESP (ASR1000-ESP10-N)
Minimum Cisco IOS XE Software release
Cisco IOS XE Software Release 2.1
Rack-mounting
Yes: 19-inch
Wall-mounting
No
External USB flash memory
1-GB USB flash-memory support
Redundant power supply
Same as for Cisco ASR 1002
Power input
Same as for Cisco ASR 1002
Power consumption
● Maximum (DC): 1020W
● Maximum (AC): 960W
● Maximum (out): 765W
Airflow
Front-to-back
Operating temperature (nominal)
32 to 104°F
(0 to 40°C)Operating temperature (short-term)
32 to 122°F
(0 to 50°C)Operating humidity (nominal) (relative humidity)
10 to 85%
Operating humidity (short-term)
5 to 90%
Storage temperature
-40 to 150°F
(-40 to 70°C)
Storage humidity (relative humidity)
5 to 95%
Operating altitude
-500 to 10,000 feet
(152 to 3048 meters)Network Equipment Building Standards (NEBS)
GR-1089 and GR-63
EMC standards
● FCC 47 CFR Part 15 Class A
● VCCI Class A
● AS/NSZ Class A
● ICES-003 Class A
● EN55022/CISPR 22 Information Technology Equipment
(Emissions)
● EN55024/CISPR 24 Information Technology Equipment
(Immunity)
● EN300 386 Telecommunications Network Equipment
● (EMC)
● EN50082-1/EN61000-6-1 Generic Immunity Standard
Safety Standard
UL60950-1
CSA C22.2 No. 60950-1-03
EN 60950-1
IEC 60950-1
AS/NZS 60950.1