A part of our products:

I n troduction of POM plastic bearing:

POM plastic bearings , PP plastic bearing POM and PA materials with good mechanical

strength and wear resistance , suitable for the production of more sophisticated plastic

bearings, working temperature from -60 °C ~ 100 °C, high strength and smooth surface ,

basically does not appear tension , its good self-lubricating properties and low coefficient

of friction , while maintaining the traditional advantages of plastic bearings on the basis

of precise and can be used in high speed operation . 

Features:
(1) rigidity, high hardness , even at low temperatures , high impact strength 
(2) good excellent elasticity , creep resistance ;
(3) high thermal stability and very good dimensional stability ;
(4)good sliding properties , wear resistance ;
(5) physiologically inert , suitable for contact with food.
(6) Even in strong acid and strong oxidizing agents, poor paint adhesion
Main purpose :
Mechanical and electrical equipment , fitness equipment , food machinery , furniture and

decorating materials

HDPE, PP, UPE material has proven to be relatively weak acid cross- environment (30%

Cucl2 solution and 30% NaoH solution tested OK) it is suitable for most acid / base / salt

/ solvent / oil / gas and seawater corrosion environment. With general plastic bearings

oil-free self -lubricating, anti-magnetic insulation properties, but lower mechanical strength,

easily deformed. In comparison, the use of UPE material will have better strength, low

friction characteristics and low temperature application characteristics (down to -150 °C).

Features:
(1) good corrosion resistance at a certain temperature and concentration ability of various

corrosive media and organic media
(2) high mechanical strength , high toughness can be maintained cutting at liquid nitrogen

temperature (-196 °C)
(3)good self- lubricating, wear high
(4) Strong anti- adhesion
(5) low water absorption, excellent electrical insulation
(6) good resistance to high energy radiation
Main purpose :
Mechanical and electrical equipment , fitness equipment , food machinery , furniture and

decorating materials

PTFE high-temperature corrosion-resistant plastic bearings
PTFE and PI as a new plastic material , proved to be all known engineering plastics and high

temperature mechanical strength, dimensional stability and better performance , in which

long-term use temperature of PTFE 260 °C, PI long-term use temperature is as high as

300 °C , and which has excellent corrosion resistance. 

ZYSL brand white plastic housing Stainless steel inner

pillow block  bearing CTL205 USFD205 with two types

end caps

Pictures show:

Drawing and specifcations of white plastic housing bearing CTL205 USFD205

Drawing of white opened and closed end caps

Description of pillow block bearing:

insert bearing Pillow Block bearing house CTL205 USFD205:

(1)structure: The pillow block ball bearings are composed of a single row deep groove ball bearings with seals at both sides and spherical outside surface, and a housing, suitable for simple support.
(2)Usage: Widely used in varieties of mechanical equipment, especially for agricultural, metallurgical, textile and printing machinery.
(3)Material: stainless steel inner bearing, whitplastic housing, white plastic opened end cap and closed end cap.

Insert bearing Pillow Block bearing house CTL205 USFD205 features:

Introduction:

Pillow block bearing units have various types of perfect sealing devices and can operate satisfactorily under hard working conditions, especially for machines operated in dusty or muddy surroundings.  

1)Pillow block a are most extensively used among the bearing units:CTL,UCP,UCPE,UCAK and SBLP,SBLLP.

These types are fixed to the shafts by means of the setscrews prepared in the innerring.

2)NAP,SALP and SALLP types are fixed to the shafts by the setscrews prepared in the eccentric locking collor.

We also supply other types of pillow block bearing:

UCP series: 

UCP201  UCP202  UCP203  UCP204  UCP205  UCP305  UCP206  UCP306  UCP207  UCP307  UCP208 

UCP308  UCP209  UCP309  UCP210  UCP310  UCP211  UCP311  UCP212  UCP312 UCP213  UCP313 

UCP214  UCP314  UCP215  UCP315  UCP216  UCP316  UCP217  UCP317……

UCIP series: 

UCIP208  UCIP209  UCIP210  UCIP211  UCIP212  UCIP213  UCIP313  UCIP314  UCIP315  UCIP316 

UCIP317  UCIP318  UCIP319  UCIP320  UCIP322  UCIP324  UCIP326  UCIP328……

UCF series: 

UCF201  UCF202  UCF203  UCF204  UCF205  UCF305  UCF206  UCF306  UCF207  UCF307  UCF208 

UCF308  UCF209  UCF309  UCF210  UCF310  UCF211  UCF311  UCF212  UCF312 UCF213  UCF313 

UCF214  UCF314  UCF215  UCF315……

UCFC series: 

UCFC201  UCFC202  UCFC203  UCFC204  UCFC205  UCFC206  UCFC207  UCFC208  UCFC209 

UCFC210  UCFC211  UCFC212  UCFC213  UCFC214  UCFC215  UCFC216  UCFC217  UCFC218……

UCT series: 

UCT201  UCT202  UCT203  UCT204  UCT205  UCT305  UCT206  UCT306  UCT207  UCT307  UCT208 

UCT308  UCT209  UCT309  UCT210  UCT310  UCT211  UCT311  UCT212  UCT312  UCT213  UCT313 

UCT214  UCT314  UCT215  UCT315  UCT216  UCT316  UCT217……

UCC series: 

UCC201  UCC202  UCC203  UCC204  UCC205  UCC305  UCC206  UCC306  UCC207  UCC307 

UCC208  UCC308  UCC209  UCC309  UCC210  UCC310  UCC211  UCC311  UCC212  UCC312…… 

Related models and specifications of white plastic housing bearing CTL205 USFD205

A: 30% T/T in advance .70% against copy of B/L

B.30% T/T in advance .70% against L/C at sight

C.Western union

D.Paypal

E:50% in advance,the balance should be paid after seeing the picture of total goods.

F:Offical Bank Account

Why us

1.High speed, High Precision, Low Noise, Long Service Life
2.Wide Array of Applications
3.Large Inventories
4.Small order accept
5.Competitive Prices and High Quality
6.Various Brands
7.Require little maintenance 
8. OEM is supported 
9. Our company insists on the "quality first, credit first" business ideas and our product specification is well-founded. We have a good reputation in the international market by our perfect service and sufficient supply.

Contact person: