High precision nonstandard r1616-2rs 12mmx28mmx9mm bearing

High precision nonstandard r1616-2rs 12mmx28mmx9mm bearing

 ball bearing r1616-2rs

Measurements

• Inner Diameter: 12
• Outer Diameter: 28
• Thickness: 9
• Measurement Unit: Metric

Materials

• Bearing Type: Radial Bearing
• Product Seal: Revolution RS
• Ball Material: Chrome Steel
• Retainer Material: Metal

Technical Specifications

• Condition: New Inventory From Factory.
• Quality Level ABEC 3 or Better
• Operating  Temperature: Sealed or Metal Shields Ranges: –20 °F to +230°F [–30 °C to +110°C]. The determining factor will be the lube and the seal material.
• Raceways: Finely polished superior finish for long life, and low noise.
• Lubrication:Wide temperature range (-50F to + 300F) High Quality Synthetic Lubricant

Brief introduction

Deep groove ball bearings are the most representative and widely used bearing. It can withstand axial loads in both directions, in addition to radial loads, even at high speed. They are available for low noise and low vibration. Bearings with mental shields and rubber seals are pre-lubrecated by some grease. Deep groove ball bearings with filling slots have the same dimensions with the standard ones. Filling slot bearings have a higher radial load carrying capacity than bearings without filling slots.

Working Principle

Deep groove ball bearings mainly take radial load as well as both radial&axial load. When with only radial load, the contact angle is zero. With radial clearance, they can withstand large axial load. The friction coefficient is small and the speed is also high.

Types

1.Single-row deep groove ball bearing
2.Single-row deep groove ball bearing with dust cover
3.Single row-deep groove ball bearing with dust cover and seal ring
4.Single-row deep groove ball bearings with the outer ring on the stopper groove  and   snap ring
5.Deep groove ball bearing with filling slot
6.Double-row deep groove ball bearing

Applications of Deep Groove Ball Bearing R1616-2RS

of these bearings can be found in automobiles, machine tools, motors, instruments, construction machinery, railway vehicle, agricultural machinery and other special machinery.

Model