The purpose of installing an oil filter is to filter out pollutants that may invade valves and other components. The filtration accuracy should be 10-15μm, and it can withstand the working pressure and impact pressure on the oil circuit, and the pressure drop should be less than 0.35MPa. At the same time, a safety valve should be installed to prevent clogging of the oil filter.

Installed on the oil return line of the system: This installation serves as an indirect filter. Generally, a back pressure valve is installed in parallel with the filter. When the filter is blocked and reaches a certain pressure value, the back pressure valve opens.

Installed on the branch oil circuit of the system.

Turbine impurity removal filter HQ25.200.12Z

LXKF-100A*25D power plant filter element

Thin oil station double cylinder oil filter LXY143*444/80 (0240)

Self-circulating filter element L1000.00.03

Return oil filter element LXKF-100B*180D

Pall line filter element 21FH2100-25, 61-180

Lubrication filter C9209011

Xinhua Hydraulic Filter XJL.02.09

Replace air compressor air filter 1621-5742-00

SNH806 Roots blower inlet stainless steel filter element

Ice machine essential oil filter A8021-14-05

Suction filter G601-21-09

Replace steam turbine oil station filter 21FH1330-60,51-10

LXY96*278/10(0258) power plant coal mill oil station filter element

Suction filter WU-160X100J

The filter is directly installed on the oil tank cover, the filter head of the filter is exposed outside the oil tank, the oil return cylinder is immersed in the oil tank, and the oil inlet is equipped with a pipe and flange connection, which simplifies the system pipeline and makes the system layout More compact, easier to install and connect.

Filter element LH0030D3BH/HC

Steam turbine EH oil station filter PG050GH

LXY143*400/80(0257) Power plant steam turbine filter element

High pressure filter element L1000.00.10

Lubrication system filter C9209011

Xinhua Oil Station Hydraulic Filter EH30.00.03.10

Stainless steel return oil filter XW-850x40H

Lubricating oil station filter LXKF-125A*40D

Turbine filter element DP405EA03/-W

Fuel tank fine filter 0508.608T1201.AW007

Coal mill filter element F122*350

replace power plant filter element RP8134F0316Z

Chemical plant air separation equipment filter element BLG-1800*10FS

Replace Rexroth high pressure filter R901025359

Replace parker filter element TTF310QLBP2EG121

Top shaft oil pump filter DP602EAOFT

Replace Emerald filter CU040P25N

Turbine hydraulic system filter element 21FV1222-1300,15-10

LXY96*339/20 (0243) Return oil filter element

Replace pall Duplex Filter HH387DJ08OMXFC7-CH0038

Replace pall lubricating oil filter HH367DJ06OMXFGV7C-CH0038

Pre-pump filter element DL002001

This filter is used to filter the oil return of the hydraulic system to filter out the metal particles generated by the wear of the components in the hydraulic system and the rubber impurities of the seals, so that the oil flowing back to the oil tank is kept clean.

The filter is installed on the top of the fuel tank, the cylinder part is immersed in the fuel tank, and is equipped with bypass valve, diffuser, filter element and other devices such as polluting and blocking the indicator. It has the characteristics of compact structure, convenient installation, large oil flow capacity, low pressure loss and convenient filter element replacement.

Performance and characteristics