ZX-B2 ignition blower has been specially developed for installation into pellet and wood chip boilers. The interface was selected so that the ignition blowers can easily be installed into any heating boiler.
About the Product
Heat Founder supply high quality air heaters which is comparable to the top brand in the market. With more than 10 years
experience of design and production, and the feedback of the products from our customers, Heatfounder brand ZX-B2 ignition blower enjoy features as below:
Ceramic Heating Element | Swedish heating wire|Ceramic material resistance Max. 1650 ºC| Siliver plated red copper pins| Strong wiring, no over heating |
Motor | High quality motor, Max. 12500 rpm. Brushless types are available for 100 pcs. |
Temperature Regulation | Stepless adjustment and no misplacement when operating. |
Plastic Material | PA66 for the handle which can resistant 280 ºC |
Gasket | High temperature resistant bearing imported from Japan, heavy duty |
Air Filter | Uniform porosity, good heat dissipation performance |
Cable(cord) | 3 meters 3*1.0mm² H07RN-F cable, flexiable |
Temperature Control | We use photocell to controll temperature inside the blower. |
Introduction:
Heatfounder ZX-B2 igniter is specialized for pellet boilers in biomass field.
a. Igniter in-line connection.
b. Igniter with 1" internal thread for easy connection of duct adapter.
c. New design, perfect fit for boiler installation.
d. The photoelectric component passes through the high temperature protection circuit to protect the heating element and the device.
Main Features
1)We use photocell to control temperature inside.
2)PA66 for body, plastic resist 280°C;
3)Japanese bearing and thermal insulation gasket;
4)Swedish heating wire;
5)Ceramic material resist 1650°C;
6)Airflow is 230L/min, max temperature is 650°C.
ZX-B2 Ignition Blower
1. Quality of the welders are comparable to the top brand in the market.
2. We supply accessories for our heating blowers and the ceramic heating elements are self-produced. Prices are competitive.
3. We offer free samples.
4. We have special offer for our dealers who are selling our products with trademark of HEATFOUNDER.
5. We offer 3% free accessories to our dealers for orders over than 10,000 usd in one shipment.
And more...
Heat Founder Group are SGS and TUV marked manufacturer of plastic welders and air heaters in China. And all our products are CE and FCC certificated to make sure it sells legally all over the world.
WARRANTY CERTIFICATE
Our engineer is able to give suggestions to the customer who are in need of heating solutions accordingly. And we help the
end users to use the ignition blower properly.
Meanwhile, we offer 1 years warranty (from the date of shipping) for the ZX-B2 ignition blower. And will replace the failed igniters
due to a defective design and production during the warranties.
For other matters:
Defects or damages resulting from any improper installation and using are not covered under the WARRANTY.
Besides, we are also not responsible in the below cases:
>Damaged during the transportation
>Damaged during the natural disasters
If you have any questions, you can contact us in 24 hours.
A: WHAT WE CAN DO IF THE BLOWER IS FAILED DURING THE WARRANTIES?
Q: We will try to help repairing the tools first, if the blower can not repaired or not worth to repair, we will offer new blowers to replace whole set.
We run businss online and off line.
Every year, heat founder teams attend or visit fairs at home and overseas. These fairs are in the fields of packing, water insulation, plastic, roofing, house and home etc. And we take a tour to visit our customers in local or nearby before/after the fair and make business earlier.
We welcome customers from all over the world to visit us. And currently, our main market is in Europe and North America.
We can help you to book hotel and pick you up from Hongqiao airport. Besides, we can exchange money as well.
A: WHAT WE CAN DO IF THE HEATING BLOWER IS FAILED DURING THE WARRANTIES?
Q: We will try to help repairing the tools first, if the blower can not repaired or not worth to repair,
we will offer new welders to replace whole set.
A: HOW CAN I GET A FREE SAMPLE?
Q: We will send an application form to you and we will make a decisiom after we checked the file.
A: CAN YOU MAKE CUSTOMIZED DESIGN FOR THE LABLE AND PACKAGING?
Q: Yes, we do OEM/ODM. As usual, MOQ is 50 pcs for customized lable.
A: WHAT IS YOUR DELIVERY TIME?
Q: As usual, our delivery time less than 1 week.
For more questions, please contact us in time.
You May Like
- High energy black ceramic resistencia encnedido pellet stove
- 260w ceramic candle used as biomass igniter
- 1100w ZX-B2 IGNITER Ignition Blower for Pellet Boiler
- Hot Air Pellet Igniter
- ZX900 Comet Geomembrane Hot Wedge Welding Machine
- Heatfounder ZX900 Comet plastic welding machine for landfill
- ZX900 Heavy Duty Automatic Geomembrane Hot Wedge Welding Machine
- Triac S 230v 1600w Heat Gun for plastic welding
- 100V 180W Heat Gun For Soldering The Wire Connector
- 127V 210W Heat Gun 1500W For Diy Craft Embossing
Popular Searches
Find Similar Products By Category
You May Like
- 220V 230W Heavy Duty Heat Gun For Mobile Repair Hot Air Gun
- 110V 600W Heat Gun Hot Air For Electronics
- 120V 750W Hot Gun For Heat Shrink Tube
- 130V 1000W Air Heat Gun For Plastic Packaging
- 230V 1200W Plastic Heat Gun For Embossing
- 100V 3400W Industrial Heat Gun For Weldy Welding Gun
- 110V 5500W Air Heat Gun For Car Repairing
- 130V 180W Heat Gun For Hot Melt Glue Gun
- 100V 220W Motor For Heat Gun For Paint Stripping
- 130V 500W 5000W Heat Gun For Removing Floor Vinyl And Linoleum
- 230V 750W Heat Temperature Gun For Melting Wax
- 240V 800W Heat Sealer Gun For Faux-Aging Of Wood
- 100V 1000W Heat Shrink Gun For Addressing Rusted Bolts And Nuts
- 110V 1100W Heat Welding Gun For Car Wrapping
- 220V 5500W Heat_Gun For Shrink Wrapping