Name: 3400w digital Heat Gun for Plastic Welding floor dryer blower
Brand: HEATFOUNDER
Availability: InStock

Product Details

Product Description

About the Product

Heat Founder supply high quality plastic welders which is comparable to the top brand in the market. With more than 10 years
experience of design and production, and the feedback of the products from our customers, Heatfounder brand ZX3400 hot air
blowers enjoy features as below:

Ceramic Heating Element	Swedish heating wire\|Ceramic material resistance Max. 1650 ºC\| Siliver plated red copper pins\| Strong wiring, no over heating
Motor	High quality motor, Max. 12500 rpm. Brushless types are available for 100 pcs.
Temperature Regulation	Stepless adjustment and no misplacement when operating.
Plastic Material	PA66 for the handle which can resistant 280 ºC
Gasket	High temperature resistant bearing imported from Japan, heavy duty
Air Filter	Uniform porosity, good heat dissipation performance
Cable(cord)	3 meters 2*1.5mm² H07RN-F cable, flexiable
Temperature Control	We use photocell to controll temperature inside the welder. And the device will be shutted down once the temp. inside the heat gun reach to 135 ºC

Product Application

Welding of thermoplastic materials as well as single - ply flexible plastic and modified bitumen in the form of boards,tubes profiles,lining membranes,coated materials,films,foams,tiles and sheets.The following procedures are possible :
Overlap welding ,welding with rod,with tape,butt welding and melt welding.
Heating - up for forming,bending and sealing of thermoplastic semi- finished materials and plastic granules.
Dry of water - damp surfaces.
Shrinking of heat shrink sleeves,films,tapes,solder sleeves, pre formd and moulded parts.
Soldering of copper pipes,solder joints and metal foils.
Defrosting of frozen water pipes.
Activating / Dissolving of solvent free adhesives and fusion adhesives.
Igniting of wood shavings,paper,coal or straw in furnaces.

Main Features

1)We use photocell to control temperature inside, once the handle inside is above 135°C, the whole circuit will be cut off;
2)PA66 for welder body, plastic resist 280°C;
3)Japanese bearing and thermal insulation gasket;
4)Swedish heating wire;
5)Ceramic material resist 1650°C;
6)Airflow is 380L/min, max temperature is 650°C.
3400w Heat Gun/Air Heater/Hot Air Blower

Packing & Delivery

Advantages

1. Quality of the welders are comparable to the top brand in the market.
2. We supply accessories for our welders and the ceramic heating elements are self-produced. Prices are competitive.
3. We offer free samples.
4. We have special offer for our dealers who are selling our products with trademark of HEATFOUNDER.
5. We offer 3% free accessories to our dealers for orders over than 10,000 usd in one shipment.
And more...

Certifications

Heat Founder Group are SGS and TUV marked manufacturer of plastic welders and air heaters in China. And all our products are CE and FCC certificated to make sure it sells legally all over the world.

Our Service

WARRANTY CERTIFICATE

Our engineer is able to give suggestions to the customer who are in need of welding solutions accordingly. And we help the
end users to use the welder and make a welding.
Meanwhile, we offer 1 years warranty (from the date of shipping) for the ZX3400 hot air gun. And will replace the failed welders
due to a defective design and production during the warranties.
For other matters:
Defects or damages resulting from any improper installation and using are not covered under the WARRANTY.
Besides, we are also not responsible in the below cases:
>Damaged during the transportation
>Damaged during the natural disasters
If you have any questions, you can contact us in 24 hours.

A: WHAT WE CAN DO IF THE WELDER IS FAILED DURING THE WARRANTIES?

Q: We will try to help repairing the tools first, if the welder can not repaired or not worth to repair, we will offer new welders to replace whole set.

Exhibition

We run businss online and off line.
Every year, heat founder teams attend or visit fairs at home and overseas. These fairs are in the fields of packing, water insulation, plastic, roofing, house and home etc. And we take a tour to visit our customers in local or nearby before/after the fair and make business earlier.

Customers Visiting

We welcome customers from all over the world to visit us. And currently, our main market is in Europe and North America.
We can help you to book hotel and pick you up from Hongqiao airport. Besides, we can exchange money as well.

FAQ

A: WHAT WE CAN DO IF THE HEAT GUN IS FAILED DURING THE WARRANTIES?
Q: We will try to help repairing the tools first, if the welder can not repaired or not worth to repair,
we will offer new welders to replace whole set.
A: HOW CAN I GET A FREE SAMPLE?
Q: We will send an application form to you and we will make a decisiom after we checked the file.
A: CAN YOU MAKE CUSTOMIZED DESIGN FOR THE LABLE AND PACKAGING?
Q: Yes, we do OEM/ODM. As usual, MOQ is 12 pcs for customized lable.
A: WHAT IS YOUR DELIVERY TIME?
Q: As usual, our delivery time less than 1 week.
For more questions, please contact us in time.

Quick Response

Contact Us Today

Contacts: Steven Jiang
Address: No.2185 Laifang Road, Songjiang Area,Shanghai,China 201615
Tel: +86-2122810889 Fax: +86-21-22816889
Phone: +86-17740873009
Email: sales02(at)heatfounder(dot)com
Skype: sales02(at)heatfounder(dot)com
Whatsapp: +86-17740873009 WeChat: +86-17740873009

You can also send an inquiry through the approach below ↓↓↓

Contact Supplier