PP melt blown fabric production line for mask

PP melt blown fabric production line is mainly used for making melt blown cloth, which is widely used as mask filtering materials, insulation filling materials, medical materials and son on.

To make qualified melt blown cloth, the whole melt blown production line should include: material feeder, single screw extruder, hydraulic screen changer, metering pump, T die, forming machine, electrostatic device, split device, winder, air compressor, air heating system. The working principle of this equipment as blow:

Auto feeder feeds polypropylene into extruder - pp materials are melt and push outer by extruder - heated air blow melted polypropylene materials through the nozzle T die (with hundreds of small holes in the mold), and threaded materials arrive at the Receiving table and become cloth - split meltblown cloth into several pieces with certain width - wind melt blown cloth into roll.

 

Technical parameter

 

Model	FGB600	FBG1200	FBG1600
Available width:	600mm	1200mm	1600mm
Extruder	SJ55	SJ75	SJ90
Availbale Raw Material:	Polypropylene	Polypropylene	Polypropylene
Fiber diameter:	2-5μm (micrometer)	2-5μm (micrometer)	2-5μm (micrometer)
Porducts GSM :	15GSM-80GSM	15GSM-80GSM	15GSM-80GSM
Production line speed :	≤80m/min	≤80m/min	≤80m/min
Max.Capacity :	350kg / day	600/ day	1200kg / day

Meltblown cloth filter material is adhered together by random distribution of polypropylene ultrafine fibers. The appearance is white, flat and soft. The material fiber fineness is 0.5-1.0μm. The random distribution of fibers provides more thermal bonding between fibers. Opportunity, so that the melt-blown gas filter material has a larger specific surface area and a higher porosity (≥75%). After high-pressure electret filtration efficiency, the product has the characteristics of low resistance, high efficiency, and high dust holding capacity.