Product Details

High quality plastic engineering mould sheet uhmwpe product/customed virgin uhmw pe 1000 block/uhmwpe board plate hdpe sheet

Specifications

HDPE plate
1,Thickness:15-200mm

2,width: 0.8-1.5m
3,color:natural ,white ,black or other colorized.

Key Specifications/Special Features of

Primary Competitive Advantages of

extrusion line: (1-30mm) x (max 2400mm) x anylength

mould pressing line:

properties

1. excellent corrosion-resisting 2. excellent wear resistance

3.excellent impact resistance 4. good self-lubricating

5. low mperature resistance 6. safe and non-toxic

7.low water aborption 8. low density

9.excellent tensile strengt

Advantage

1,Udated Equipments and modern Machining-Center

Four production lines and more than 15 updated precision processing equipments,

Customized Engineering plastic parts available.

2,Rich experience:

Processional technician and rich experience in engineering plastic field

3,High products quality

Stable raw material and independent material test center to ensure the quality

4,Low products price with high productivity

5,Low transportation cost ,near Qingdao port and Xingang Port

6,Qualified manufacturer:

ISO9001:2008 approved

Extablished Company-standard for our products

Qualified exporter without products problem since company established

High-integrity enterprise verified by Industrial and Commercial Bureau

Parameter

No.	Item	Unit	Test standard	Result
1	Density	g/cm3	GB/T1033-1966	0.96-1
2	Molding shrinkage %		ASTMD6474	1.0-1.5
3	Elongation at break	%	GB/T1040-1992	238
4	Tensile strength	Mpa	GB/T1040-1992	45.3
5	Ball indentation hardness test 30g	Mpa	DINISO 2039-1	38
6	Rockwell hardness	R	ISO868	57
7	Simply supported beam hardness	KJ/m	ISO179	85
8	Bending strength	Mpa	GB/T9341-2000	23
9	Compression strength	Mpa	GB/T1041-1992	24
10	Static softening temp.		ENISO3146	132
11	Specific heat	KJ/(Kg.K)		2.05
12	Impact strength	Kj/m3	D-256	100-160
13	Heat conductivity{w/(m.k)}	%(m/m)	ISO11358	0.16-0.14
14	Sliding properties and friction coefficient		PLASTIC/STEEL(WET)	0.19
15	Sliding properties and friction coefficient		PLASTIC/STEEL(DRY)	0.14