General Information: 

SXDL-330 is applied for detecting the different cable faults including: low impedance, short circuit, open circuit broken fault, high impedance leakage and high impedance flash over fault. It’s suitable for various 35KV and below copper aluminum core power cables, coaxial telecommunication cable, and local cable. The system is including: 1. SXDL-330S Cable Fault Tester 2. SXDL-330D Cable Fault Locator 3. SXDL-330L Route Tracer 4. Pulse capacitor 5. Other accessories.

Features:

• Large LCD screen.
• Measuring mode: Low voltage pulse, impulse high voltage current sampling, DC high voltage flash over and etc.
• High performance rechargeable battery, USB sampling port, could connect with laptop directly. HV is fully isolated against operator and instrument, high anti-interference ability and safe reliability.
• The distance from test to failure location can be displayed directly. 
• Build in printer, test results and waveform can be stored automatically. 
• Full English interface, to display the test waveform clearly.  
• Windows system, easy to operate. 
• Double waveform track tracers, easy to compare and analyze the waveforms.

 SXDL-330S Cable Fault Tester

Specification:

SXDL-330D Digital Cable Fault Locator

It’s used to locate the power cable insulated fault point, route, depth accurately.

Features:

• High pointing sensitivity.
• Digital displaying the distance between the faults locating and sensor probe.
• To touch the sensor probe on fault cable or its near cable, the fault distance and direction could be displayed accurately.
• Easy to operate.
• Compact designation, portable.

Specification:

SXDL-330L Route Tracer

Route tracing signal source, to be equipped with locator to find the route and depth of underground cable.

Features:

• Adopting 15KHz sine signal, to effectively restrain the power frequency interference and co-channel interference of TV line frequency (15625Hz).
• Amplitude modulation technology, suitable for beat receiver and vertical boosting detection receiver as well, fully satisfy the cable which with various length.

Specification:

• Output power: ≥30W when the load resistance is 10Ω, and adjustable continuously.
• Signal frequency: 15KHZ
• Working duty: interrupted (duty cycle 1Hz/sec), equiamplitude, amplitude modulation (modulation frequency 400-1000Hz), equiamplitude output is suitable for beat receiver, modulamplitude is suitable for vertical boosting detection receiver.
• Over heated, over load protection, 8 hours continuously working.
• Power Supply: 220V +10%(-20%)
• Working temperature: -20℃~+50℃ RH<95%.

Sansion Power Electic Co., Ltd. is a modern company focusing on design and manufacturing of test and measurement instruments. Our company covers 5,000 square meters with 120 employees.

Sansion has more than 20 years’ experience of producing electrical test sets and solutions for transformers, circuit breakers, CT/PT, relay protection, cable and electric power systems to test and calibration equipment.

Sansion has obtained ISO 9001 quality certificate and all of our products are in conformity with the international standards.

With superior quality, reasonable price and perfect after-sales service, we are aiming to expand the markets in all countries of the world. We look forward to working with you.