RC Dead Weight Creep & Rupture Testing Machine

Applications:

This creep testing machine is designed and built for testing the creep properties and creep rupture strength on ferrous metal, nonferrous metal and their alloy that subjects to constant tensile load at a certain temperature at the specified time interval. It is designed according to “ high temperature creep & rupture strength GB/2039-1997” National Standard. Meanwhile, it conforms to ISO204/1997 International Standard and HB5151-96 Aviation Industrial Standard. It can offer liable test/inspection certificate for aviation Industry & other special materials property that should endure high temperature.

Specification:

Capacity: Model RC-10:10KN; Model RC-30: 30KN; Model RC-50: 50KN; Model RC-100: 100KN; Model RC-200: 200KN

Load range: 2-100% FS

Load accuracy: ≤±1.0%

Variation of indicating load value: ≤±1.0%

The eccentricity of the upper and lower chucks: ≤10%

Min dead weight load: 1N

Automatic level range: ±0.1mm

Lever ratio: 1:50 / 1:100

Lower tensile rod speed: 0-50mm/min

Lower tensile rod stroke: 0-150mm for RC-30 and RC-50; 0-200mm for RC-100 and RC-200

High temperature furnace & Temperature-controller

Working Temp. range: 400°C~1200°C

Length of effective soaking zone: 150mm

Furnace pipe & electric furnace size:

Furnace pipe: φ90mm (Inner Dia.)×400mm (L),

Furnace: φ300mm (outer Dia,)×420mm (L);

Furnace life: ≥3000hours (Constant working time less than 1000°C)

Furnace Temperature accuracy (°C):

Measure & Control temperature meter: digital display, sensitivity: 0.1°C;

Auto compensation error of cold end:≤0.5°C;

 To be matched freely with thermocouple.

Moving speed of lower grip holder

Speed range: 0.005~50mm/min;

Error: ±0.5%

Timing error: ±0.2%

Structure:

This testing machine consists of main unit, heating furnace, temperature measuring system, and deformation measuring system. The main unit & heating furnace forms a complete set in applications. Temperature measuring system adopts group control & centralized administration. Deformation measuring system features as centralized checking, auto recording & random looking over history test data