DY Magic Switchable Glass is an innovative laminated glass with liquid crystal PDLC film sandwiched between two tempered glass panels, Switchable glass is capable of adjusting light transmission between transparent and opaque using AC power just as turning the light on. DY Switchable Film consists of two layers of PET-ITO conductive film and an intermediate liquid crystal layer.(No self adhesive) DY Switchable Self-adhesive Film is a self adhesive smart film which can directly stick on the glass, the glass can change from clear to opaque immediately via remote controller or APP. Even without electricity, glass in the frosted state, lighting is still very good.
PDLC Switchable Glass Film Advantages: 1. Privacy Protection- Switchable Glass Film can control the transparency of glass at any time. And it's very responsive, it can switch states in an instant. 2. Sound Insulation- The dimming film and eva film between the smart switchable glass has soundproof effect. It can partially block the noise. 3. Power Saving- Switchable Glass turns transparent when the power on, the lighting is still very good when the power off. 4. Energy Saving- Switchable Glass Film can keep out over 99% UV and 98% Infrared.
Application
DY smart glass can be applied to office,
conference room,
hotel,
store front,
bank counter,
subway etc.
Installation manual
Two options to order the film:
Customized Size
*Size is customized according to your requirement.
*Width 1.5m max for self-adhesive film and 1.8m max for laminated smart film.
*With wire and copper finished on it.
Buy a whole roll
*You will need to put the wire and copper by yourself.
*Width 1.5m max for self-adhesive film and 1.8m max for laminated smart film.
*Total about 50sqm for one roll.
Using glass slicker to scrape the stain on the glass surface.
Cleaning the glass surface with alcohol and water.
Wiping dry with lint-free cloth.
Preparing the matching size of film ( flat to open 4 hours before pasting)
Pasting from the top, be careful not to break the film during pasting.
Using scraper to scrape off the bubbles.
We will also provide you with detail videos after you recieved our product. It will easy for you to finish.
If you decide to buy a whole roll of film, you will need to cut up the film into matching size and solder the wire and copper by yourself. Wish the following tips are helpful for you:
Cutting up the film into the size you need.
Putting the copper and wire on the film.
Soldering
Packing&shipping
We supply two packing options: 1.Carton (for air transportation/ express) 2. Wooden case (for maritime transportation)
Certifications
The certifications of DY Smart Switchable Glass: CE, ROSH, Smart Glass SGS