RH-400A Slitting Machine With Hot Cutter
This machine is widely used in the production area of lace, garment processing, embroidery, banners production, packaging, gift processing, footwear processing, packaging etc.
Technical Feature:
1. The dimension of stripes can be adjustable convenient and efficient. You can choose any width of each section on the basis of minimum width. 2. The verticalstructure of slitting cutter is humanistic. It can make the influence on heating caused by slitting process reduce to a minimum 3. Equipped with an electronic controller, this device can control the cutter heating , and also heighten an effect of energy saving
4. The machine adopts infrared rays guiding system to make the fabrics slitting neatly and trimly and decrease scrap to a great extent
5. The cutter of this machine is made of tungsten steel alloy, with which after special processing. The machine can be using much longer time by these cutters. At the same time of slitting, temperature can steal the fabric edges, so that no excess fabric irregular edges produced and no charred fabric leave
6. The newly designed feeding basket together with a transition device which could make slit conveniently both for rolled and flat form of fabrics
7. Compact mechanical design of the machine make greatly reduced footprint, thus saving space
Technical Parameters:
|
1. The maximum cutting width |
1800-3200 mm |
|
2. The minimum slitting width |
10 mm |
|
3. Maximum cutting speed |
0-40m/min(depend on the material) |
|
4. Power |
5kw(depend on the amount of cutters) |
|
5. Voltage |
380V |
|
6. Weight |
1500 kg |
|
7. Dimension |
2800mm×2400mm×1600mm |