RH-400 Terry Cloth Slitting Machine

Application:

The machine is for terry cloth after inspection, trims directly into the tube packs. It can also be used by more knife-cut take-up, or for post-mortem volume of direct coiling.   

 

Technical Feature:

1,Good performance with high quality

2,Use double-frequency control to adjust tension, both thick and thin fabric can adapt

3,Equipped with a photoelectronic exploration device, to which promote edge accuracy     

4,Use computer counter to calculate the length and the yard of fabrics

5,Adopted the light device to enhance inspection quality

6,Clod cut, the aerodynamic configuration cold cutter, through the air pressure to control, adjust the knife pressure-thick, thin may apply

7,Hot cut, targeted vertical electric heating knife, only 180W single/double-throw power control and temperature control regulator combination, in accordance with requirements of self-regulation and control settings

 

Technical Parameters:

1,Effective width	1800mm~3500mm(optional)
2,Winding diameter	480mm (can customized)
3,Take-up speed	0~60 m/min
4,Correcting category	Hydraulic type  photoelectric probe
5,Tension adjustment	0~400n
6,Power	1.5~2.5kw
7,Weight	about 1300KG
8,Dimension	2650(L)*2800(W)*2000(H)mm