a:Equipped with 100KG color mixing machine for mixing raw materials and auxiliary additives.

b:Equipped with vacuum suction machine, automatically draw the agitated materials into the hopper.

c:It is equipped with a 50KG drying hopper, with a heating device to stabilize the temperature inside the hopper, and a discharge switch .

a:The reduction gearbox has the characteristics of high bearing capacity, smooth transmission, low noise, high efficiency and high life.

b:The diameter of the extruding screw is 65 screws, and the material is 38CrmoAI high-quality nitrided steel. The surface hardness is 65-70 through nitriding treatment.

c:The drive motor is a 22KW frequency conversion motor.

d:Temperature control system: The screw temperature is precisely

controlled by the Japanese RKC temperature control table, and the

cooling uses a low noise and efficient cooling centrifugal fan.

e:Screen changer: fast hydraulic screen changer, equipped with

hydraulic station, with pressure detection.

f:Metering pump: The pump body is made of high-quality alloy steel,

heat-treated, chrome-plated and polished; equipped with a pressure

control system, which can automatically adjust the running speed of

the motor and stabilize the discharge.

g:Mould:width 600mm.

h:Air heater: 40KW air heater.

a:Net curtain type collection, with an exhaust cooling system on the back, which can adjust the degree of exhaust wind.

b:Static electret: Equipped with an electrostatic protection cover, the rack can facilitate the free increase and decrease of static devices.

c:Slitting cutter: set 4 disc cutters, driven by motor.

d:Rewinding roller: equipped with 2 air-expansion shafts to replace the melt-blown cloth, equipped with metering device, can start counting function, and display the current rewinding length in real time.

e:The electrical control of the winding part is controlled by PLC touch screen, and the operation is simple.

Suggested workshop space:12000*4000*4000mm,constant temperature