High Speed Automatic Two Side Seal Poly Craft paper air Bubble film mailer Bag Making Machine

Specifications

1. This machine is designed for kraft bubble envelopes bubble envelopes, co-extruded film production and can make one bag or two bags at one time.

2. Making way: combinate the co-extruded film / kraft paper with PE bubble film by hot roll bonding, then folding,sealinga and cutting to be bubble envelope.

3. Main control: adopt micro-computer control, LCD display, servo motor fix the bag length. With functions: auto counting, alarm and auto stop when reach the set bag number, stop in high position, etc.

4.Infeed part: adopt active following type, control the up and down layer material feed respectively, the speed be controlled by the vector frequency inventor .

5.Material combine : adopt 4 gun heads of glue to spray the hot melt to adhesive the paper and bubble film.

6.Euipped with 2 sets adhesive tape pasting device.

7.Reel unwinding part: adopt 4-station unwinding, manual magnetic powder tension control. EPC to control the PE bubble film.

8.Equipped with slitting blade: can make two small bags at one time.( when the sealing width less than 300mm)

I: Introduction of machine

1. This machine is customized to make laminating Kraft and PE film bubble envelope in one line or double lines. And the machines are also suitable for making polythene film, aluminized film and pearl film bubble envelope.

<![if !supportLists]>2. <![endif]>Method of making bags: First, make the laminating Kraft or PE film and bubble film together by heated laminating roller. Next fold the laminated material by folding devices. And then, seal the material by hot electric cross sealer. Finally cut the material and a standard laminated envelope is made.

<![if !supportLists]>3. <![endif]>This machine is a specialized one with high quality and simple operation method .It adopts advanced motion control technology. And this machine is controlled by computer from unwinding to cutting. The envelopes made by this machine are good-looking and strong.

Ⅱ.Technical Parameters

1. Suitable material:

laminating Kraft roll

polythene film roll

bubble film roll

polythene and bubble film roll

aluminized and bubble film roll 

pearl and bubble film roll

Mechanical executing speed:40~80 pieces/min

(the actual speed of making bags may differ according to the size of bags, thickness of materials and time of fusing.)

<![if !supportLists]>3. <![endif]>Max width of bag:

One line: 600mm (including the envelope flap)

Double line: 300mm (including the envelope flap)

4.Max length of bag:580mm 

5.Max width of unwinding:

Kraft or polythene film:1150mm

Bubble film: 1100mm

<![if !supportLists]>6. <![endif]>Diameter of unwinding:

Kraft or polythene film: 800mm

Bubble film: 1300mm

<![if !supportLists]>7. <![endif]>Weight: 5100kg

8. Overall dimension: 16200mmX2300mmX2200mm (LXWXH)

9. Power required: 25Kw

10. Voltage: three-phase four-wire, AC 380V 50Hz

11. Steel Frame

III. Main Configuration:

1. COMPUTER CONTROL:

TRIO motion control system, HITIC 5.7 inches touch screen, YASKAWA servo motor. It has functions such as: auto-counting, alarming, stopping when a set of bags been made, and showing bag number, sealer and cutter stop at the highest position.

Main component: