medical cap making machine
USD $27,500 - $28,000 /Set
Min.Order:1 Set
Wenzhou Xiaohai Import And Export Co., Ltd
PERFORMANCE CHARACTERISTICS:
ALT-330 Doctor Cap Making Machine adopt advanced ultrasonic welding to non-woven doctor cap forming a fold. It is a fully automatic production machine from raw material supplying to finished product output. With PLC system control, the stability is high, the failure is low. Import deceleration brake motor effectively reduced the defect rate of products. This machine with aluminum alloy rack, the appearance is beautiful and will not get rusted permanently. Under replacing the mould it can produce the different specification doctor caps.
The cap can be applied to electronic manufacturing, clean workshop, food and beverage service industry, food processing, school, spray processing,Stamping hardware, hospital, hand-processing industry, public health centre, beauty salon,
Pharmaceutical industry, factory, public place and so on.
TECHNICAL PARAMETERS:
Type:ALT-330
Power:8.5kw
Power Supply:AC380V or 220V
Designed Speed:120pcs/min
Optimum Speed:60-100pcs/min
Dimension:8250*880*1600mm
Weight:1800kg
INSTRUCTIONS:
No | Item | Quantity |
1 | Ultrasonic | 10sets (made in China) |
2 | Motor | 1set TaiWan “YongKun” |
3 | Suction pump | 1set |
4 | Inverter | 1set TaiWan “Sunfar” |
5 | Sensor | 1set Japan“OMRON” |
6 | PLC | 1set Japan “Mitsubishi” |
7. | Touch screen | 1 set TaiWan “Wei- Lun” |
Material roll width :540mm
Material density:25-50gsm, we use 30gsm always
1.Half/full elastic cap need :4mm width elastic
2.cut the band from cap: no need other material
3.tie on the band cap need : 20mm width nonwoven strip
Customer Bought This Machine,Also Have Interesting To Buy Following Machines: