Product Details

Product Description

Large popcorn machine product introduction: 1. Stirring mode adopts planetary stirring rotation, stir evenly, realizes the non-integer rotation ratio of rotation and autotransmission, the stirring blade rotates 360 degrees, there is no stirring dead angle in the pot, the material is stirred, the stirring blade is made of PTFE, and the stability is high. Wear-resistant, high temperature resistant, non-toxic and tasteless. 2. It adopts frequency conversion speed regulation power, fully automatic stirring, provides stable stirring speed to make popcorn quality stable, and the running speed can be adjusted. 3. It adopts professional burner, automatic ignition, automatic gas-breaking with explosion-proof valve, manual ignition, improve combustion efficiency, save energy, increase popcorn output, short bursting time and high ball-out rate. 4. The hydraulic system is adopted, the feeding and discharging are simple and convenient, the pot body can be tilted at 90 degrees, the material is not dead angle, and it is easy to clean. 5. The equipment adopts two heating modes: gas heating and electromagnetic heating.

Features of the Planetary Stirring Popcorn Machine: 1. Short bursting time, advanced combustion series combined with pot material to shorten corn burst time. 2. Multi-flavor one-pot out, using stepless frequency control to mix corn, sugar and other flavors of raw materials evenly. 3. The sugar is evenly mixed, and the combination of rotation and revolution is adopted to ensure that there is no blind spot in the pot. 4. The flower ball type can be fixed in one pot, and the bursting temperature of the spherical corn can be reached in a short time, which effectively solves the problem that only popcorn can be produced on the market. 5. Instantly discharge, avoid paste pot, and ensure the color and fragrance of popcorn.

Large popcorn machine heating form Electromagnetic heating: The principle of electromagnetic induction eddy current is used to directly apply heat to corn to reduce heat loss. It is more energy-saving, environmentally friendly, non-polluting, safe to use, and relatively expensive. Gas heating: high temperature in a moment, rapid temperature rise and low temperature, easy to use energy, that is, commonly used liquefied gas, not subject to factory voltage limit, cost-effective. Electric heating heat transfer oil: It takes a certain time to heat up and cool down. If it is continuously operated, it is more energy-saving than the electromagnetic popcorn machine, and it is relatively cheap. The spherical popcorn production line can match the length of the machine and the assembly line according to the customer's output. From the single machine, the popcorn is poured onto the conveyor belt, and it is broken up, cooled, transported, and filtered to directly package the popcorn! Greatly improved efficiency, increased production, meeting customer orders and demanding requirements! Moreover, the screened popcorn is full and has good sphericity to meet the high quality requirements of customers!

Popcorn line features 1. saving manpower Transforming traditional hand-crafted processing into automated, standardized production 2. high equipment utilization After a group of equipment enters the production line, the output is several times higher than that of a single machine. 3.high product quality In the production process, the equipment is unified in temperature and time, and the material is discharged once. 4. production capacity is stable

Features: The pot body adopts a spin-formed SUS304 stainless steel head to ensure smooth and smooth inside the pot, 360 degree rotation and easy to clean. The mixing arm adopts automatic hydraulic lifting or automatic hydraulic rear side turning pot. After the popcorn is formed, it is necessary to leave the heat source as soon as possible to prevent the high temperature residual heat from causing the paste pot. It adopts frequency conversion speed regulation power, fully automatic stirring, provides stable stirring speed to make popcorn quality stable, and the running speed can be adjusted. The structure of the stirring slurry and the scraper is unique, and the stirring blade of the stirring slurry is resistant to high temperature and corrosion. The exterior of the pot body is made of aluminum silicate insulation material, which has good insulation effect and is especially suitable for use in popcorn processing plants. Product Usage Particularly suitable for popcorn processing. It is also widely used in the mixing, frying and processing of materials such as lotus seed, fruit puree, bean stuffing, jujube, sauce, curry seasoning food, daily chemical, pharmaceutical and other industries.

Pot Volume	100L	200L	300L
Pot diameter(mm)	800	900	1000
Power (Hydraulic)	1.5+1.5
Rotary speed	Adjustable
Stir type	planet / Scraping bottom
Lifting arm / pot turning type	Automatic / hydraulic
*Dimension (LWH mm)*	165012501550	180016501550	184018501670
Heating method	One of them: electric heating, gas heating, Electromagnetic heating

Product Display

Packing & Delivery

Packing: The normal package is wooden. If export to european countries,the wooden box will be fumigated.

FOB

Sea freight

Air freight

About us

Company Profile

Luohe Orange Mechanical Equipment Co.,Ltd (Orange) is a professional mechanical equipment manufacturer which is located in Henan Province, China. The company is specialized in production, processing and sales of food machinery, agriculture machinery and other machineries. The main production scopes that we cover are: snack food processing machines, candy processing machines, fruit and vegetables processing machines, packaging machines, water well drilling machines, and various peeling machines.

The company covers 35,000 m2and the fixed asset of the company is RMB 10 million Yuan. There are over 100 employees, more than 30 technicians, and over 100 sets of various manufacturing equipment. The equipment are included: large scale forcing press machine, digital lathe, digital wire-electrode cutting equipment, various kinds of processing machines and equipment, etc. The company owns national patents and proprietary technology with independent ....

Our Service

1. Inquiry and consulting support

2.Sending machine video for reference

3.Testing machine before delivery according to requirements.

4.View our Factory