Product Details

Practical Brine Injector/injection machine for chicken/pig/fish/pork with different needles

Excellent design of machine

1.This machine is used for injecting saline into meat ,fish ,sea slug ,which would keep the food fresh ,tender and also can improve the production rate.

2.We designed automatic device to avoid the needles from hurting by other hard things.

4.The injection pressure can be set between 0.1-0.9Mpa, You can change the pressure easliy ,and the screen can be sight by you immediately.

5.The machine use variable-frequence governor , stepping distance ,stepping speed and injection speed can be changed meanwhile .

Machine parameter

Model	Production Capacity(kg/h)	Power(kw)	The Number Of Needle	Injection Rate(%)	Injection Pressure(Mpa)	Injection Number (time/min)	Outside Measurement (mm)
OR-48	200-300	3.7	48	40%-80%	0.45-0.9	20-45	13507501650

Notes: We also provide brine injector with 80 needles, 108 needles and so on. We can customize the machine according to your reuiqrements.

Brief operation steps

1.Please place the machine at a work place.

2.Pour moderate water into the material crock .

3.Contect the machine with power,and check if the machine can fuction well ,You can attention the direction of flowing water , Rotate the needle clockwise water out ,rotate the needle anticlockwise the material corck would appear air bubble ,If not , you should change the power line .

4.Please clean the whole machine before use.

5.The injection liquid should put into the material crock in advance for reserving .

6.Put the meat or food on the chain ,place the skip car at discharge outlet.

7.Turn on the injection pump then the injection switch .

8.Place the meat or food from discharge inlet uniformly.

9.Clean the machine totally and carefully after injection for next time using .

Notes

1.Must cut off the power when you need adjust or repair during working.

2.Injection liquid must through the net filter before flower into the material corck , Ohterwise other varia come into the pump or needle head ,the pump and needle head would be broken.

3.Must cut off the power if liquid flow out ,and handle the problem immediatly .

4.Must check if the needle head is blocked or not ,if yes ,should clean up immediatly .

Advantages of machine and company

1.High production capacity and best quality .

2.Perfect design and best price.

3.Simple operation and easy to maintain.

4.Best service and quick delivery .

5.Your satisfaction will be our best efforts.

Picture for reference: