hot sale Dairy Farm Waste Manure Solid Liquid Separator/dewatering Machine To Process Cow Dung 

 

 

Structure

Host, a non-blocked pump, a control cabinet, and a pipeline. The main body consists of a body, a mesh screen, a squeeze Dragon, a vibration motor, a deceleration motor, a weight distribution, and a unloading device.

Description

The animal waste solid liquid separator is designed to reduce the water content of animal manure, such as cow dung, pig manure and chicken manure. In addition, the  animal waste solid liquid separator can remove acid sludge, dregs, kitchen waste and many other dregs. It separates solids and liquids well. Solids can be used to make organic fertilizers or fuels, and liquids are good materials for irrigation.

Features

(1) Screw-type extrusion solid-liquid separator has small volume, low rotation speed, simple operation, convenient installation and maintenance, low cost, high efficiency, fast investment recovery, and no need to add any coagulant;

(2) Integrated hopper design, stable feeding compensation, wet and dry design;

(3) Thick stainless steel spiral shaft, the part is subjected to wear-resisting treatment, long service life, and the pitch parameter is scientific and reasonable;

(4) The electronic control system has overload protection, leakage protection and low voltage protection;

(5) The stainless steel filter mesh is manufactured by strip-shaped high-precision molding process, which has the characteristics of good filtration, anti-clogging and long service life;

 

 

Working principle

The working process is as follows: The unplugged pump pumps NON-fermented pig dung into the body and accelerates the discharge under the action of a vibration motor. At this time, the power transmission, squeezing the Dragon, gradually pushes the dung water to the front of the body, while constantly improving the front edge pressure, The moisture in the material is forced to squeeze out the screen and flow out the drain pipe under the action of edge pressure band filtration. The work of the Extrusion is continuous, the material is continuously pumped into the body, and the pressure on the leading edge is constantly increasing. When it is large to a certain extent, the discharge mouth is opened and the extrusion mouth is squeezed to achieve the purpose of extrusion. In order to master the speed and water content of the feed, the weight distribution block below the host can be adjusted to achieve a satisfactory and appropriate feed state.

 

 

 

 

 

 

 

 

 

Model Number	Inlet	Drain outlet	Dry manure output (CBM)	Mainframe Power/Voltage	Pump power (KW)	Dimensions (Length*width*height)mm	Weight (KG)
180	76m	102mm	5 CBM	4kw / 380V/220V	3KW	1800*1300*500mm	230 KG
200			7 CNM	5.5kw /380V/220V		2100*1400*500mm	360 KG
200    (Extended type)			7 CBM	5.5kw / 380V		2300*1400*500mm	380 KG
280 (Extended type)			12 CBM	7.5kw /380V		2300*1400*600mm	400 KG
300			15 CBM	7.5kw/380V		2400*1400*600mm	420 KG
300   (Extended type)			15 CBM	7.5kw/380V		2550*1400*600mm	450 KG
400			20 CBM	11 kw /380V		2700*1400*800mm	600 KG
800(Oblique sieve)			6 CBM	4kw / 380V/220V			320 KG
1200 (Oblique sieve)			8 CBM	5.5kw / 380V			380 KG