High quality CYLINDRICAL MANDREL BEND TESTER

The impact strength of the paint film was measured by dropping a heavy object from a high place. The weight hammer is fixed on the required height by the controller screw, and its height can be read out by the positioning mark. When the controller screw is pressed, the controller spring is compressed. At this time, the round hole of the controller slider is aligned with the round hole of the upper cover and the lower bottom of the controller, so that the connected heavy hammer falls down and impacts the punch rod. The punch rod acts downward on the sample plate which is placed on the pillow block in advance, and then Lift the weight hammer and take out the tested sample plate to observe the paint film test on the sample plate.

Technical parameters:

1. Instrument scale length: 0-50cm, 0-100cm, 0-120cm, dividing into 1cm.

2. Weight of heavy hammer: 1000g, with detachable hook. Lead particles can be added or reduced in the hammer body to change the weight of heavy hammer.

3. Impact rod end steel ball: 8mm.

4. The depth of impact bar inserted into the hole of pillow block: 2mm.

5. Edge curvature radius of pillow block: 2.5 ~ 3.0 mm, diameter of concave hole: 15 mm.

6. Total weight: 10kg, 15kg, 20kg

7. Base size: 210 * 210 * 200 mm

Testing machine series

Shipping

1. FedEx/DHL/UPS/TNT for samples, Door-to-Door;

Brand Name	Better United
Place of Origin	Hebei, China
Model Number	BT
Power	Electronic

High quality CYLINDRICAL MANDREL BEND TESTER

Product Features

You May Like

Popular Searches

Find Similar Products By Category

You May Like