≥1

US $ 2200

≥10

US $ 2000

≥6

US $ 1800

1. 10.1 inch color touch screen display, with curve display, data saving and printing.

2. At the same time, it supports two international standards and domestic standards

British Standard BS 1377-4, American Standard ASTM d1883 and national standard t0134-1993

3. It can set the deformation record point and loading speed arbitrarily to meet the needs of different test standards.

4. With data processing function, CBR value can be calculated automatically.

5. Servo motor control, with software speed feedback, loading speed stepless regulation.

6. Built in micro printer can print data stream list and test results.

7. Digital dial indicator can be selected to further improve the test accuracy.

8. PC version test software can be selected, and PC software can be used for independent test and output detailed report.

 The parameters for CBR Bearing ration test machine

1. Service conditions: ambient temperature: 0 ℃ - 60 ℃, relative temperature: < 85%

2. Main technical indexes: large load: 50.00kn, deformation measurement: 0-25.00mm

Optional double digital dial indicator

Loading speed: 0.20 mm / min (servo control)

3. Load sensor index: working range: 0-50kn

4. Displacement sensor index: working range: 0-25mm

Division value: 0.001mm, linearity: 0.3%

5. The machine adopts double column frame structure, which is composed of base, gearbox, column, beam, stepping motor and accessories.

5.1 main specifications and parameters:

. large rated load: 50kN

Motor specification: 220 V, 0.37 kW, 1440 rpm

Dimension: 400 * 350 * 800mm

5.2 operation of main engine

The front of the main engine is equipped with a manual window. When a new machine arrives, it is necessary to shake down the pressure head with a hand crank. During the calibration, the pressure is manually pressurized with the handle.

≥1

US $ 499

≥10

US $ 469

1.Speed

maximum pressure 3 t of 1 mm/min

2.Injection rod

transverse diameter phi 50 mm. Inside diameter phi 52 mm to 100 mm long

3.Porous plate

two pieces

4.Dial indicator

0 ~ 10 mm, three phi

5.Loading plate

6 blocks (diameter 150 mm, 52 mm diameter phi, each 1.25 Kg).

6.Try tube

inner diameter 125 mm, 170 mm high, block phi 151 mm, 50 mm high with heavy compaction test tube.