Portable Rigid Overhead Wire Catenary System Wire Wear Measurement Device
USD $1,000 - $5,000 /Set
Min.Order:1 Set
Zhuozhou Tianpeng Imp.&Exp. Trade Co., Ltd.
CEA-F01 model self-circulation Reynolds education apparatus for university chemical majors
CEA-H03 model Double-pipe heat exchanger air-steam heat exchange experimental apparatus
Mass transfer direction experiment CEA-M03 model Packed tower gas absorption apparatus
Mass transfer direction experiment CEA-M04 model Plate-type tower column plate performance apparatus
CEA-R02 model Internal recirculation reactor gas RTD (residence time distribution ) apparatus
Portable Rigid Overhead Wire Catenary System Wire Wear Measurement Device
The wear measurement device can measure the rigid catenary system contact line. The measuring head uses the wireless micro camera as the image acquisition key measuring part, the measuring head, wireless date receiver and one pc Ultrahigh voltage insulating rod assemble one full set measuring device .worker holds UHV insulating rod to push the measuring head touches each measurement point, full system uses Zigbee technology data to transmit measuring values wirelessly, wireless diagnostor collect the measuring date and to do date analysis and storage.the wireless diagnostor is used touch screen computer technology, operator may input working area mark like area No/Line NO /Pole No. The wear measurement device uses a special software to statistically analyze the contact line wear area data, and can exchange data through via USB port connect PC and print out the specified report specifications.
Features
1. Using micro camera measuring/ handhold mirco computer, Zigbee communication integrated window CE operation system, can measuring and collect wear measurement date intuitively, conveniently and quickly.
2. Display the pole number, wear width and wear percentage result directly
3 May spend the driving interval time to do high-voltage non-stop power wire wear detection, does not occupy the line maintenance time. It is safe and reliable, it can reduce the maintenance engineer working intensive, reduce the measurement error of man-made mistake, improve the maintenance efficiency.
4. Find the eccentric wear position and automatically display the maximum wear width of the tested wire.
5, Small size, light weight, easy to assemble and use.
6, Diagnostor can show clear interface screen under strong sunshine, can be used in day and night.
7. This device has a data storage function, which can transfer the data of on-site inspection to the computer for storage, analysis and report printing.
Main Technical Parameters
1. Measuring height: 1m ~ 6.5m;
2. Scope of application: CT85, 110, 120, 150 or other DIN 43141 /TB/T 2810 wire
3. Measurement accuracy: 0.02mm;
4, data transmission: Zigbee technology, data wireless transmission, ground receiving terminal synchronous display;
5, display content: pillar number, wire wear width, wear percentage prompt;
6, storage: applause computer (added) real-time storage;
7, insulation performance: suitable for power frequency, single-phase (AT27.5 kV, BT25 kV) contact network live working;
8, portable: probe weight <1kg;
9, power: probe and receiver using lithium-ion batteries;
10, power consumption: can work continuously for 8 hours at room temperature;
11, working environment: -10 ° C ~ +50 ° C relative humidity 80%;