STANDARD: EN 12697-10, 12697-31, ASTM D6307, SHRP M-002

    The Gyratory Compactor is built to SHRP specifications.
    It produces asphalt specimens that best predict long-term pavement performance. This information is not attainable from Marshall hammers or any other laboratory compaction equipment. Automatically measuring the specimen height during consolidation, produces a densifi cation graph that the designer can use to produce the best possible paving mixture.

• Simple To Run
Pressing a single key lowers the ram, induces teh angle, performs compaction and records data. Every specimen is compacted with a constant consolidation pressure, angle and rate of gyration, which produces consistent samples time. The parameters are easily changed in minutes by following menu instructions.
• Operator Safety
The gyratory compactor is designed with the safety of the operator in mind. All rotating parts are beneath the work surface and away from the operator. Doors and access panels have safety switches for added protection from moving parts.
• Easy Installation
It is easy to install. Its compact size allows access through standard door openings.
• Quiet
Unlike other gyratory compactors and marshall hammers, this is quiet, allowing normal conversation in the area while the machine is running.
• Factory Calibrated, Ready to Run
This compactor comes calibrated and ready for use. The pressure, angle and rate of gyration are set to SHRP guidelines. No assembly or calibration is required. Simply connect to a power supply and you are ready to operate.
• Operation
The compactor can be programmed to operate automatically or the user can manually control each compaction step. The system can be programmed to compact specimens for a set number of gyrations or to desired specimen height. User can change the compaction angle.
• Display
It shows the number of gyrations, consolidation pressure and rate of gyration.
• Attached Extruder
A specimen extruder, which is provided, can be attached directly below the control panel. Its height can be adjusted to match that of the compactor tabletop, which allows the users to slide a mould with its compacted specimen directly into the extruder.
• Data Output
Output of speicimen height per gyration may be directed automatically to a printer or computer during the consolidation cycle. In addition, the stored data may be uploaded to a computer or printed after compaction is completed.

Model HTHY XY150 specifications
Power: 380V
Vertical load: continuously adjustable from 200 to 1500 Kpa
Pressure accuracy: <±60 Kpa(for gyrations 1-5) <±18 Kpa(after first 5 gyrations)
Number of gyratory: adjustable up to 999
External angle of gyration: 1.25±0.01 degrees
Inside diameter of molds: 149.90mm to 150.00mm
Height of Mold cylinder: 230mm
Max Height of Specimen: 130mm
Gyratory compaction displacement range: 0-300 mm
Gyration rate: 30±0.5 cycles/min
Motor nominal speed: 1800 cycle/min
Dimension(HXWXD): 2140X890X940mm
Mould weight: 10.2 kg
Weight: 370 kg

Accessories
Extruder for specimen removal from mould
One dia. 150mm mould
Height calibration block
Height fi

lling block