Mini corn harvester machine used in hills and mountains

  This machine completes a row of corn picking and straw crushing. Supporting a set of spike can be removed under the filling bag, stubble height adjustable, tension clutch work safety, small turning radius of small operation. The aircraft per hour of corn corn smelting a month of direct smashing, peeling skin is not clean, ear height of 60 cm above can be harvested, the higher the straw the greater the rate of light bar.

  The corn harvester has a engine not less than 5KW, the power driver walking tires to walk through gearbox, the power also transmit another gearbox, the gearbox drives two iron harvesting wheels and baldes below. While the machine working forward, the stem of corn plant pulled inside, the stem of corn then pulled down by two rotating iron wheels, but the corn cob cannot pass the go through because of thickness, then it cut down and fall into case, the stem cut in pieces by blades. Suit for the corn planted in the hilly land.

  The machine can be divided into two parts, when the part with another gearbox removed easily, the remained can be used as a tiller.

1 Small size, adaptability, widely used in hills and mountains and other large corn harvesters can not pass the sporadic block

2 Full-featured, picking crushed straw crushed into the field, etc., and almost the same function and large corn harvester.

3 Matching power, machine delivery.

4 Easy to install and disassemble, really a car more use.

5 Flexible operation, cutting crop height can be adjusted, turning radius is small.

A. Multifunction, cut stem into pieces return to field while cut off corn cob.

B. well-adapted, adapt to hilly land where the road is not good enough, or the square is smalll.

C. high-efficiency, skilled operator can harvest more than 10mu.

D. Light and flexible, small volume, light weight, do not require too much professional knowledge and too much training, can be easily opearted.

E. Low price, low fuel consumption, low cost while using.

F. Can be used as a independent tiller, use for rotary tillage, deep tillage, ridging, etc.

1. Are you manufacturer?

Yes, we are manufacturer for agricultural machinery and parts with more than 10 years' experience.