The working principle of Atlas filter:

The compressed air from the air compressor entrains large and small oil droplets. Large oil droplets are easily separated by the oil and gas separator, while small oil droplets (suspended oil particles) must be filtered through the micron glass fiber filter layer of the oil and gas separator. .

We use more advanced anti-corrosion and high-efficiency ultra-fine fiber agglomerated materials as the main filter. The filter bed of the system filter element is composed of pre-filter layer, ultra-fine fiber layer, support layer, filter layer and gravity sedimentation layer to make the compressor output air The solid particles above 3μm in the middle can be filtered out, and the very small oil-water vapor dissolution of about 0.01-1μm is condensed into larger oil droplets when passing through the filter element, and accumulates at the bottom of the filter element, and then passes through the recess at the bottom of the filter element. The oil return pipe siphons and returns to the lubrication system so that the compressor discharges more pure, oil-free compressed air.

Atlas filter technical parameters:

1. Filtration accuracy: 0.1µm

2. Filtration efficiency 99.999%

3. The oil content of compressed air can reach below 3ppm

4. The service life can reach about 3500~5200h

5. Initial pressure difference: ≦0.02MPa

6. The filter material is made of American HV (Binzer) and American Lydall company glass fiber

Atlas filter test standard:

Strictly follow the filter element——

Crack resistance test

Structural integrity testing

Material and liquid compatibility test

Hydraulic flow characteristic detection

Our company survive with high quality, develop with credibility

Professional production structure