Product Details

Product Description

Application:

Concrete vibrating table is used in the test room. The site is used for the test piece forming and prefabricated components

1) The concrete magnetic vibration table is widely used in construction, building materials and scientific research units. It is used for the concrete test block or other materials to compact. It is an ideal experimental equipment in the contemporary. 2)Design principle of magnetic shaker (Concrete) wall-mounted brick disk vibration table consists of: table top, magnetic field, attached vibration table, support spring, amplitude modulation spring, articulation device, pull rod, program control instrument, etc. The table surface is welded / joined by 10 channel steel and 12 steel plates. The table surface is supported by springs. The upper table surface is connected with the support spring and the amplitude modulation spring base by a tie rod. Provided by the device, it is installed on the lower part of the table. When the vibrator is running, the eccentric weights generate high-speed vibration force. The support spring mainly plays a supporting and damping role. 3)How to use magnetic shaker (Concrete) Wall brick disk shaking table working procedure, controlled by controller / controller, put concrete test mold on the disk, turn on the power switch, set the test piece to the required value, time setting range 0-999 Arbitrary seconds, replace / open the disk control switch, press the automatic button to work, press the stop switch during working hours, a working procedure is completed, after the vibration of the shaker stops, turn off the magnetic control switch, remove the test mold, and perform the next In the first test, press the start switch to clear the digital display automatically.

Feature.

This product is 3/4 times heavier than the ordinary vibrating table, with the same amplitude and frequency. The disk and the base are integrated into one body, and the operation is simple. The 380V vibration magnetic field line can also be used with 220V voltage. The switch and the magnetic field switch can be integrated, and can be separated. Automatic magnetization, no magnetism when power is off, disk suction power is about 130 kg, after powering off, all magnetics on the disk can be removed, and the test piece can be arbitrarily removed.

1. Save labor, save time, save material, strong magnetic force, strong suction, solid vibration, no running out of pulp, accurate data. 2. The noise is small, the allowable noise does not exceed 0.75%, and it does not leak electricity, water or magnetic flux. 3. It is equipped with a digital timer and digital display, which can be arbitrarily timed according to the required time and automatically controlled at that time. 4. The machine is fully enclosed, with heat dissipation holes on the bottom surface, and five terminal posts on the front, two of which are magnetic wires, three wires are power wires, and another single terminal is the zero wire, which is obvious on the Sign. 5. In order to achieve the amplitude data for the user, the eccentric wheels on both sides of the motor are specially designed as dovetail grooves. A fixed screw is set on the side and a small screw is set on the side. When adjusting the amplitude, the large middle screw can be loosened and the side small screws can be removed. Down, push the amplitude small upwards, push the amplitude large downwards, fix the middle large screw and adjust the side small screws after adjusting, but you must fix the small holes in the rotation to achieve your desired amplitude.

Technical Parameters

Table size (mm)	500×500	800×800	1000×1000	1000×2000
Vibration frequency (times / min)	2860	2860	2860	2860
Amplitude(mm)	0.3-0.6	0.3-0.6	0.3-0.6	0.3-0.6
Vibrator power (KW)	0.75	1.1-1.5	1.5	3
Maximum load (kg)	75	230	250	500
Working voltage	380v/220v	380v/220v	380v/220v	380v/220v

Product Show

Our Company

Certifications

Packing & Delivery

FAQ

Q: Are you trading company or manufacturer ?
A: We are the manufactory ,in this area for 20years

Q: How long is your delivery time?
A: If the products in stock, generally 5-10 days,.if stockout 15-20 days ,according to the quantity of order.

Q: Do you provide samples ? is it free ?
A: Yes, we could offer the sample for your test , but its not free.Hope to understand the high cost of products for high quality

Q: What is your terms of payment ?
A: Payment amount<=1000USD, 100% in advance. Payment amount >=1000USD, 30% T/T in advance ,balance as the B/L copy

Contact Supplier