EN 932-5 ISO 565 laboratory vibration sieve shaker test equipment for soil lab testing

Appliactions:

This machine is suitable for the screening and analysis of materials in the tests of highways, construction, geological and metallurgical research, etc. It is convenient and simple to complete the classification work when it is turned on for 5 minutes with digital display control. It performs sieving work through circumferential swing and up-and-down vibration. The sieving time can be set according to needs. It is convenient to use and easy to maintain. The main technical indicators of the shock standard shaker: 1. Equipped with sieve: Ф200mm / Ф300mm 2.Power supply: three-phase AC380V ± 10% 50HZ 3. Screen shake times: 221 times / min 4. Power: 370W 5. Vibration times: 147 times / min 6. Slewing diameter: 12.5MM Installation of shock standard shaker This machine can be installed on a cement foundation. The size of the foundation screw is as follows: its thickness is 300 mm. The height and size of the foundation exposed on the ground or level with the ground, according to the specific use needs, install the circuit and ground according to the electrical regulations. After the installation is completed, the motor rotates in the same direction as the arrow, and there is a shock motion. If it is the opposite, the motor In dry running, you can change the terminal to start normally. Working principle of vibrating : This machine is mainly composed of transmission, swing, shock, clamping mechanism and electrical appliances. This machine is driven by the motor through the main shaft and the drive shaft to drive the gear, and the worm gear to drive the cam. The main eccentric shaft drives the two auxiliary eccentric shafts, so that the screen seat has the dual motions of rotation and shock

Features：

1. Less noise

2. Light weight

3. Small size

4. Timing control

5. Easy movement

6. Standard precision