Tensile Compression bending Universal Testing Machine with PC display 

Model: TBTUTM-100AS/300AS/600AS/1000AS

 

This series of products are mainly used for metal, nonmetal materials tensile, compression, bending, shear and other mechanical properties.

 This series of products for the cylinder under, four column, double screw, double space frame structure, tensile and compressive spacing electric adjustment, clamp for hydraulic automatic, reliable clamping, convenient.There are built-in beam coil spring buffer device, which can effectively eliminate the transmission gap between the screw and nut, and play a good role in the sample buffer pull off.Configure the platform high toughness fence, the space between the test and the formation of the operator isolation, can effectively guarantee the safety of the operator.

 

Feature

A. PC display universal material testing machine adopt hydraulic power source, using test and control system on the test data acquisition and processing,

 

B. It consists of main unit, oil source (hydraulic power source), measurement and control systems,

test equipment.

 

C. the maximum test force 100kN / 300kN / 600kN / 1000kN,

Accuracy level better than 1 level.

 

D. It can meet the national requirements of metal tensile test in the standard test requirements, but also in accordance with other standards for different materials or products of the tensile, compression, bending, cutting, etc.

Result including: tensile strength, yield strength and other performance;

 

E. It is a six column, double space structure, stretching space between the upper beam and the lower beam, compression space between the lower beam and the test bench, the test space through the sprocket and lead screw rotating the lower beam to move up and down To adjust automatically. The upper and lower beams are equipped with hydraulically controlled clamping jaws. The standard models are equipped with V-shaped and flat jaws for tension testing cylindrical and flat specimens. The lower end of the standard cross-beam is equipped with On the pressure plate, test bench with a spherical structure with the pressure plate can conduct compression test.

 

F. It is designed to expand the possibility of fitting additional fixtures to accomplish more tests.

Such as: bolt installation fixture can be used to do the bolt stretching,

with bending fixture can do round bar or plate bending test,

equipped with cutting fixture can do round bar shear strength test,

in the compression space with a flexure, shear, splitting, elastic modulus instrument can do concrete and cement block test.

 

Technical Specification

Model	TBTUTM-100AS	TBTUTM-300AS	TBTUTM- 600AS	TBTUTM-1000AS
Max.Capacity(KN)	100	300	600	1000
Accuracy class	Lever 1(0.5)
Max distance of compression plate(mm)	500	600	600	600
Max distance of tensile	600	700	700	700
Piston stoke(mm)	200	200	200	200
Diameter of round specimen(mm)	Φ6-Φ22	Φ10-Φ32	Φ13-Φ40	Φ14-Φ45
Diameter of flat specimen(mm)	0-15	0-20	0-20	0-40
Maximum distance of bending test(mm)	300	300	300	300
Load control	Manual
Specimen clamping method	Hydraulic
Dimension of host(mm)	800*620*1850	800*620*1870	800*620*1900	900*700*2250
Dimension/Weight of Oil source cabinet	800*600*1600mm/300kg
Power(KW)	2.2	2.2	2.2	2.2
Weight of host(kg)	1450	1600	1900	2600