Features

Extremely high stability

Highly integrated, no external buttons, operation and display integrated on the touch screen

MDG/MDE allows processing of measured value capability for various measuring applications.

One-touch master set operation and automatic master setting by panel key or input signals are utilized.

Max. of 12 measuring items are registered, no need to set parameters after selecting items.

Feedback signals can be put out to processing machine by UCL/LCL quality control graphical display

Pre-set counters are ready for count up output of NG repeat, selecting counter, classifies counter, etc.

The detector uses high precision and a good linear differential transformer, so very slight change can be detected with high reliability.

Any size measuring head can be configured

Micrometer can be customized with roundness, minimum, maximum, average measurement

Closed structure with waterproof and oil-proof. Suitable for harsh industrial environments.

10 sets of programs can be set up on site to carry out measurements of various specifications. One-click product switching.

Independent air source control box to ensure that the inside of the instrument is dry and has a longer service life

Micrometer can be customized with built-in gas source alarm, it will stop working from air pressure as low as 300KPa, to ensure the accuracy of the measurement data

Micrometer can store 100,000 measurement data, power loss data is not lost

Automatically save with delay and send test data

7 inches TFT LCD screen for easy programming

 

Specifications

 

Item	MDG-500 Programable Air Micrometer
Channel	2-12 channels
Number of workpieces memorized	max. 12*as requested
Operation	Enable to set up optionally according to measuring requirement like circularity, cylindricity, max/min value, etc.
Measurement function	Inner diameter, outer diameter, thickness, highness, taper, straightness, verticality, concentricity, cylindricity, flatness, center distance, parallelism, torsion, bounce, position, fitting gap, airtightness, etc.
One-touch calibration	Easy calibration (magnification or drift control) by one-touch operation start, etc.
NC feedback function	Compensated +/- signal by UCL/LCL quality control graphical display (by repeat counter, with count cancelled function after feedback)
Workpiece counter	Count of number measured
Air pressure supplied	300~700kPa
Power	100~240V±10% 50/60Hz 11VA
Dimension	260mm(W)*280mm(H)*200mm(D)

Performance 

Items	Standard Performances
Measuring range	5µm	10µm	25µm	50µm	100µm
Display resolution	0.1µm	0.2µm	0.5µm	1.0µm	2.0µm
Max. measuring error	0.2µm	0.4µm	1.0µm	2.0µm	4.0µm
Repeatability	0.1µm	0.2µm	0.5µm	1.0µm	2.0µm
Response time	Max 1.2s