Note: The model of laser is OEM-I-X, X stands for wavelength. Other wavelengths can be customized on request.

 Other Parameters:

1. BEAM PROPERTIES (FOR DPSS):
- Transversal mode: Near TEM00
- Beam diameter at aperture (1/e2): ~3 mm
- Beam divergence (full angle): <1 mrad
- Polarization ratio: better than 100:1

2. MODULATION:
- All diode lasers can be modulated up to more than 100kHz via TTL pin
- All DPSS lasers can be modulated at 0~30kHz TTL pin

3. FIBER SPECS:
- All lasers are made with FC or SMA905 connectors
- Standard length of a fiber is 1 m or 2 m, other lengths available on request.

4. PHYSICAL PROPERTIES:
- Control interface type: RS232 or USB
- External power supply requirement: +5VDC, 12A for DPSS, +12VDC, 3A for diode
  Dimensions (L-W-H): 86 (L) ×50(W) ×19 (H) (excluding pins and output window)
- Beam height from the base: 12 mm
- Optimum heatsink temperature (non-condensing): +15...+30℃
- Max. heatsink temperature 40℃
- Internal temperature stabilization: TEC
- Overheat protection: Yes
- Storage temperature (non-condensing): -10 to +50 ℃
- Warranty: 12 months

 Dimensions:

                                        Diode (with fiber) 

                                           DPSS (with fiber) 

Option & Accessory:

Testing Result: