The AAAC Protected Cable accoridng to IRAM ,the Conductors as following :

1. Aluminum Conductor

The conductors must be made of aluminum wire of class 2 circular formation compacted according to IRAM-NM-280, and may be included when it is expressly requested, the longitudinal blockage against the passage of water, according to IEC 60502-2.

The different layers of wire must have alternate wiring directions, the direction of the last layer being to the right.

Wires, before wiring, must comply with IRAM 2176

2. Aluminum Alloy Conductor

The conductors must be made of aluminum alloy wires of circular formation, in accordance with IRAM 2212, and may include, when requested, longitudinal blocking against the water pass, in accordance with IEC 60502-2.

3.Conductors made of aluminum with steel core

The conductors shall consist of aluminum wires wired on a non-compacted circular forming steel core in accordance with IRAM 2187 Parts 1 or 2, except for the inclusion of a grease layer between the steel core and the wire layer of aluminum.

The minimum sections, in square millimeters, shall be as specified in the following table: