Standards: GB/T 5210, ASTM D4541/D7234, ISO 4624/16276-1 and other standards

This model automatic pull-off adhesion tester is an intelligent adhesion test instrument. 5 Inch LCD directly displays the pull off force, in MPa and psi unit. Constant pulling load, real time display, easy data PC connection and data management.

Features

Simple operation, accurate data, low maintenance cost and price of supporting consumables:

◆ Portable design, built-in rechargeable lithium battery, no external power supply, suitable for field and laboratory use

The pulling method automatically tests the adhesion between the coating and the substrate; the test data is highly reproducible

◆ The electrically controlled hydraulic pump automatically continuously and steadily increases the pulling force, minimizing the influence of human error and the test process

◆ 5.0-inch large touch screen, with pull-out force curve display function, can clearly observe the changes in pull-out force during the whole test

◆ Test rate employs PID closed loop control, stable and adjustable

◆ The test force can also be kept constant during the test to determine whether the coating is separated from the substrate under a certain load.

◆ Built-in Micro-USB interface, the instrument is works like a USB flash drive after connecting to a computer, and it can directly copy the stored experimental data without installing any software, simple and convenient

◆ Comply with GB/T 5210, ASTM D4541/D7234, ISO 4624/16276-1 and other standards

◆ Built-in real-time clock, all saved data has corresponding experiment date and time; convenient for users to summarize and manage the experimental data

◆ Various pull-off dolly available with size of 10, 14, 20 and 50mm, applicable for products with different bonding strengths, expand the function and resolution of the instrument

◆ Each instrument is calibrated by a traceable pressure sensor before leaving the factory, with an accuracy of ±1% of full scale, and a calibration certificate is attached.

◆  Pull-out data including maximum pull-out force, pull-out rate, test time and pull-out dolly size are storage;

◆ The real time display makes it’s easier for operators to observe and adjust the pull-off rate

◆ Only need to press the key to select the size of the pull-off unit, change the measurement unit or store the reading

◆ No conversion table is needed, the instrument automatically calculates the pull-off force according to the size of the pull-off unit

◆ Disposable pull-off unit, can be used for long-term record keeping

◆ Aluminum automatic centering and pulling unit ensures accurate measurement on smooth or uneven surfaces

◆ The industry degree high quality pressure sensor ensures the continuity of accuracy

Specifications