Overview of HK101610 bearing

Drawn cup needle roller bearings ,needle roller bearing support radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The low cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearings are easily installed with a press fit in the housing.

Specifications of HK101610 bearing

Needle roller bearing specifications & Standards

-Dimensions:the boundary dimensions of the drawn cup needle roller bearings are in accordance with ISO

-Bore size:Its size is meassured in millimeters.The bore is a hollow cylindrical chamber or barrel shaped where the metal balls  are placed.

-Outer ring width:It is the width of the outer ring measured in millimeters.

Expanded Options

- Assemblies with bearings

- Engineered polymer cages

- Bearings with one or two seals

-Closed end bearings

- Oil holes

-Drawn sleeve

Needle roller Bearing Notice 

Needle roller bearing capacity big, applicable to the limited size of installation of supporting structure, Journal as rolling surface hardening on the surface, bearing use force fit into the hole, need not again for axial positioning. Bearings should be injected into the right amount of grease before installation, under normal circumstances, after assembly don't have to BK type lubricating bearing used in shaft neck without out of the bearing, encloses the seal effect, and can withstand the smaller axial winding.

Needle roller bearings series

HK drawn cup needle roller bearings with open ends 
HK...RS drawn cup needle roller bearings with open ends, single side sealing 
HK...2RS drawn cup needle roller bearings with open ends, double sides sealing 
BK drawn cup needle roller bearings with closed ends. 
BK...RS drawn cup needle roller bearings with closed ends, single side sealing 
MF drawn cup needle roller bearings with closed ends, tip full complement needle roller type 
MFY drawn cup needle roller bearings with closed ends, flat head full complement needle roller type 
F drawn cup needle roller bearings with open ends, tip full complement needle roller type 
FY drawn cup needle roller bearings with open ends, flat head full complement needle roller type 
SCE drawn cup needle roller bearings with open ends, inch system 
BCE drawn cup needle roller bearings with closed ends, inch system 
SCH drawn cup needle roller bearing with open ends,inch system,heavy series 
BCH  drawn cup needle roller bearing with closed ends,inch system,heavy series 
SN cup needle roller bearing with open ends,flat head full complement needle roller type,inch system 
B cup needle roller bearing with open ends,tip head full complement needle roller type,inch system 
BH Drawn cup needle roller bearing with open ends,tip head full complement needle roller type,inch system 
M Drawn cup needle roller bearing with open ends,flat head full complement needle roller type,inch system 
MH Drawn cup needle roller bearing with open ends,flat head full complement needle roller type,inch system 
HMK drawn cup needle roller bearings with open ends,heavy series 

About us                                                                                                                            

1.Staff mission: to develop, innovation, cooperation and good faith. 
2,Company's goals: a hundred years the name Enterprise, the industry fresh air. 
3,Staff objectives: Choi-chi, with a minor, win-win progress. 
4,Business philosophy: science and technology, quality, service, win-win situation. 
5,Service spirit: Dissemination of cutting-edge technology together to create wealth. 
6,Staff spirit: innovation, cooperation, sincerity and dedication. 
7,Development strategy: the internationalization of enterprises to enter the brand name. 
8,The core concept: the market conception of qualified personnel, learning concept 

Main bearing products                                                                                                       

 Deep groove ball bearing: 6000series, 6100series, 6200series, 6300series, 6400 series, 6800 series,6900 series, etc.

 Angular contact ball bearing: 7100series, 7200series, 7300series, 7400series, etc.

 Taper roller bearing: 30000series, 31000series, 32000series, 33000 series.

 Spherical roller bearing: 20000series, 21000series, 22000series, 23000series.

 Cylindrical roller bearing: N series, NU series, NJ series, etc.

 Pillow block bearing: UC series, UCP series, UCF series, UCFL series.

 Self aligning ball bearing: 1200series, 1300series, 2200series, 2300series. 

 Needle Roller Bearing   

 Sliding bearing   

 Slewing Bearing

 Rod End Joint Bearing  

 Ceramic Bearing  

 Bearing Accessories

Excellent and high quality control                                                                                                         

1.Rich Inventory to mostly shorten the delivery time

2.Package design as clients' requirement

3.Providing the most economic carriage solution

4.OEM manufacturing supplied(Including clients' own brand)

5.Produce as drawings provided by clients

6.Design drawings as specifications and applications

7.Preferred payment term:T/T;Paypal;Western Union

Through the organized quality assurance system, our company strive to accomplish         

a. Fullfill it's commitment towards quality products,

b. Efficient delivery time, generally 3-7 days,

c. Provide immediate and efficient response to customers' feedback,

d. Germany imported technology, CNC machines.

e. Provide OEM&Customized service.

Processing flow