011.20.250 Four-point conact ball slewing bearing with gear in inner ring

Descriptions of slewing bearing

Double-row different diameter ball slewing bearing has three seats. The steel balls and the spacers may be directly arranged into the upper and lower raceways. Two rows of steel balls with different diameters are fitted according to the load. Such open mode fitting features extraordinary convenience. The load angles of both upper and lower races are 90°, which enable the bearing to bear large axial force and the overturning moment. When the radial force is larger than 1/10 of the axial force, the raceways should be especially designed. The axial dimension and radial dimension of double-row ball slewing bearing are rather large, and the bearing construction is sturdy. Hence it is especially suitable for tower cranes which requiring working diameter over medium range, mobile cranes and other unloading machines.

slewing bearing can carry large load. Packaging Before delivery, every slewing beairng is filled in rust-preventive lubricant on the inside surface, outerside surface and races, and then packed with plastic film, kraft paper and blue belt;3 Types:

Single-row roller slewing bearing

Single-row crossed roller slewing bearing

Double-row ball slewing bearing

Double-row four point slewing bearing

Three-row roller slewing bearing

4 Specification: As customer's requirement

5 Application: widely used in industries such as metallurgy,vessel oil,chemistry,mine coat,hydroelectric power,port machinery,heavy machinery and so on.

6 Quality: ISO9001 certificate

7 OEM service is available

Basic structure of four-point slewing bearing

Usually, it is combined with worm, Slewing bearings,shell,motor,etc.

The composition is:

Left to Right(Upper):1.Outer Gear(with Gear or Non Gear)

                                2.seal belt

                                3.rolling element(ball roller or pin roller)

                                4.oil nipple

Left to Right(Down):1.blocking

                                2.blocking pin

                                3.inner gear(with gear or non gear)

                                4.separator or retainer

                                5.mounting hole

Model numbers of four-point slewing bearing

 Pictures:

Our Services