10 micron stainless steel mesh pleated hydraulic Aviation kerosene cartridge melt candle filter
USD $20 - $55 /Piece
Min.Order:5 Pieces
Xinxiang City Huahang Filter Co., Ltd.
Hydraulic accessories WF series without magnetic WF-12CL hydraulic suction oil filter
Hydraulic accessories WF series WF-24D hydraulic suction oil filter without magnetic
Hydraulic accessories WF series without magnetic WF-10CL hydraulic suction oil cartridges filter
80 micron WF series Hydraulic accessories WF-4B hydraulic suction oil filter without magnetic
Hydraulic accessories WF series without magnetic WF-16DL hydraulic suction oil cartridges filter
Hydraulic accessories MF series hydraulic suction oil cartridges filter MF-08 MF-10 MF-12
YL-34-200 hydraulic oil filter element used for aviation system.
Hydraulic oil filter is used in various oil systems to filter out solid impurities generated by external mixing or system operation. It is mainly installed on the oil absorption road, pressure oil line, oil return line, bypass, and separate filtration system in the system.
1 good filtration performance, uniform particle filtration performance for 2-200μm filtration particle size;
2 good corrosion resistance, heat resistance, pressure resistance and wear resistance;
3 stainless steel filter element pores uniform, accurate filtration accuracy;
4 stainless steel filter unit has a large flow per unit area;
5 stainless steel filter element for low temperature, high temperature environment; can be reused after cleaning, no replacement
Stainless steel melt filter is mainly made of stainless steel woven mesh and stainless steel fiber sintered felt. It has the characteristics of smooth channel, easy cleaning, high temperature resistance, corrosion resistance, no falling off of the wire mesh, high porosity, good gas permeability, strong dirt holding capacity and strong regeneration ability.
1. Put off the original hydraulic oil before changing, check the oil return filter, oil absorption filter, pilot filter to see if there are iron filings or other impurities, if there are hydraulic components failure, after cleaning, cleaning system .
2. When changing hydraulic oil, all hydraulic oil filter elements (return oil filter, oil suction filter, pilot filter) must be replaced at the same time, otherwise it is equivalent to no change.
3. Identify the hydraulic oil label. Different grades and different brands of hydraulic oil are not mixed, and may react to deteriorate and produce floc. It is recommended to use the excavator to specify oil.
4. Before the refueling, the oil-absorbing filter element must be installed first. The nozzle that is covered by the oil-absorbing filter element leads directly to the main pump. When the impurity is light, the main pump wears up, and the pump is pumped.
5. Refueling to the standard position, the oil tank generally has an oil level gauge to see the liquid level gauge. Pay attention to the parking mode. Generally, all the cylinders are fully retracted, that is, the arm and bucket are fully extended and landed.
6. After adding the oil, pay attention to the main pump to discharge air, otherwise the light will temporarily stop the whole car, the main pump will be abnormal (air blast), and the air hole will damage the main pump. The air exhaust method is to loosen the pipe joint directly on the top of the main pump and directly fill it up.
ISO9001:2008
CE
SGS
Xinxiang City Huahang Filter Co., Ltd. is a professional industrial filter manufacturer integrating design, production and marketing. With strong technical force, perfect testing means, and excellent after-sales service, we provide users with a variety of high-quality products.
Our main products include hydraulic filters, air filters and pipe filters. Products are widely used in petroleum, chemical and metallurgical machinery, textile, pharmaceutical, automobile, chemical fiber, and air-conditioning.
"Quality first, customer first" is our business objective. We will, as always, offer new and old customers with the best quality service.
Q1 How can we get the quotation of flter cartridges
A: Kindly please let us know the specifications,such as the material,length,micron,adapter,apply in which industry.....
Q2. How about your delivery time?
A: Generally, it will take 25 to 35 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order. and if the item was non standard, we have to consider extra 10-15days for tooling/mould made.
Q3. Can you produce according to the samples or drawings?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q4. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.