Quick Details:

-Features and Benefits 

•  

• RF 2 2 transceiver with integrated 12-bit DACs and ADCs

• TX band: 47 MHz to 6.0 GHz

• RX band: 70 MHz to 6.0 GHz

• Supports TDD and FDD operation

• Tunable channel bandwidth: <200 kHz to 56 MHz

• Dual receivers: 6 differential or 12 single-ended inputs

• Superior receiver sensitivity with a noise figure of 2 dB at 800 MHz LO

• RX gain control

• Real-time monitor and control signals for manual gain

• Independent automatic gain control

• Dual transmitters: 4 differential outputs

• Highly linear broadband transmitter

• TX EVM: ≤?40 dB

• TX noise: ≤?157 dBm/Hz noise floor

• TX monitor: ≥66 dB dynamic range with 1 dB accuracy

• Integrated fractional-N synthesizers

• 2.4 Hz maximum local oscillator (LO) step size

• Multichip synchronization

• CMOS/LVDS digital interface

-Products Details 

 the AD9361 is a high performance, highly integrated radio frequency (RF) Agile Transceiver? Designed for use in 3G and 4G base station applications. Its programmability and wideband capability make it ideal for a broad range of transceiver applications. the device combines a RF front end with a flexible mixed-signal baseband section and integrated frequency synthesizers, simplifying design-in by providing a configurable digital interface to a processor. The AD9361 receiver LO operates from 70 MHz to 6.0 GHz and the transmitter LO operates from 47 MHz to 6.0 GHz range, covering most licensed and unlicensed bands. Channel bandwidths from less than 200 kHz to 56 MHz are supported.

  the two independent direct conversion receivers have state-of-the-art noise figure and linearity. Each receive (RX) subsystem includes independent automatic gain control (AGC), DC offset correction, quadrature correction, and digital filtering, thereby eliminating the need for these functions in the digital baseband. The AD9361 also has flexible manual gain modes that can be externally controlled. Two high dynamic range analog-to-digital converters (ADCs) per channel digitize the received I and Q signals and pass them through configurable decimation filters and 128-tap finite impulse response (FIR) filters to produce a 12-bit output signal at the appropriate sample rate.

  the transmitters use a direct conversion architecture that achieves high modulation accuracy with ultralow noise. this transmitter design produces a best in class TX error vector magnitude (EVM) of

  the fully integrated phase-locked loops (PLLs) provide low power fractional-N frequency synthesis for all receive and transmit channels. Channel isolation, demanded by frequency division duplex (FDD) systems, is integrated into the design. All VCO and loop filter components are integrated. The core of the AD9361 can be powered directly from a 1.3 V regulator. The IC is controlled via a standard 4-wire serial port and four real-time input/output control pins. Comprehensive power-down modes are included to minimize power consumption during normal use. The AD9361 is packaged in a 10 mm 10 mm, 144-ball chip scale package ball grid array (CSP_BGA).

-Applications

• Point to point communication systems

• Femtocell/picocell/microcell base stations

• General-purpose radio systems

FAQ:

1) How can I place order?       

A: After we quote you and confirmed,we will draft trade assurance order to you.

2) What is your terms of payment?       

A:T/T ,Western Union,Paypal,Ali Escrow,Ali Trade Assurance Order.

3) What's the order procedure?

A:(1)Quantity and specification-->(2)Confirmed "e-->(3)Draft Trade Assurance Order-->(4)Payment done-->(5)Processing&Shipping-->(6)Receipt of goods-->(7)Order finished and Leave Feedback.

4)How do you take care when your clients received defective products?       

A: Replacement. If there are some defective items, we usually credit to our customer or replace in next shipment.

5) How do you check all the goods in good quality?       

A: We have all these wholesale product in stock,they are 100% NEW Original Brand.From Resistor to IC,we only sell original brand product.Every product we sell can be checked in our ERP systerm.We take Life-long cooperation with every customer from all over the world,the quality is the most significant factors in our mind.

6) Do you sell the original products?       

A: Yes, we only sale the original products, and all of them are brand new. If one of our products is counterfeit, we will compensate you ten times.

7) What payment methods do you support?

A: We provide: Visa / MasterCard/ TT / Wester union / PayPal etc.

8) What about the shipment methods?

A: We provide: DHL / UPS / TNT / FedEx / EMS / ePacket etc..

9) Are the products tested before shipment?

A: All products were tested before shipment, and the quality problems were negligible.

10) Do you have enough stock?

A: Yes, all of our products are in stock, if you are looking for other parts, please feel free to contact us (bonnie@omochip.com). We will try our best to help you find them.