Renlang 5 Handles Double Chin Removal Cryotherapy Fat Freezing Slimming Cryolipolysis Machine
USD $1,250 - $1,450 /Set
Min.Order:1 Set
Guangzhou Renlang Electronic Technology Co., Ltd.
Renlang 5 Handles Double Chin Removal Cryotherapy Fat Freezing Slimming Cryolipolysis Machine
Principle of Cryolipolysis slimming machine |
Cryo is a new non-invasive way to gently and effectively reduce fat in targeted areas of the body.
As triglyceride in fats will be converted into solid in particular low temperatures, it uses advanced cooling technology to selectively target fat bulges and eliminate fat cells through a gradual process that does not harm the surrounding tissues, reduce unwanted fat.
A number of methods have been attempted for lipolysis including the use of laser, ultrasound, and radiofrequency electric current, since cryo was developed appling cooling to tissue, was approved as the most effective way to fat reduction.
This revolutionary new idea of dissolving fat, which is approved as an important technology progress in fat reduction since it is put into use.
Specifications | |
Descriptions | Vacuum Cavitation Machine Cryolipolysie Body Slimming Machine |
Voltage | 110V-240V, 50/60Hz |
Screen | 8 inch touch screen |
Power consumption | ≤800W |
Cooling output temperature | -10~4°C |
Vacuum | 650mmhg |
Cryo output pressure (Vacuum pressure) | 0-106kpa |
Cavitation Frenquency | 40Khz |
RF Freqnency | 5Mhz |
Atmospheric pressure | 80KPa - 106KPa |
Large Cryo Cap Size | 68*100*180mm |
Small Cryo Cap Size | 54*80*155mm |
Double chin cryo | Yes |
Net weight | 43KG |
Packing size | 580*540mm*1260mm |
Preparation before using |
1. Install the 4 attached caster wheels on the machine, fasten the screws.
↓
2. Install the attached on-hook on the machine, put the probes into the corresponding racks.
↓
3. Before using the cryo fat freeze slimming machine, it is required to open the inlet and overflow behind for adding distilled water or purified wate
↓
4. Connect the attached water funnel to the inlet, start adding purified water until water flows out from the overflow, and then close the inlet and ove
↓
5. Check the host power cable is connected.
↓
6. Check the key switch of machine is connected.